Bottom Brackets

BSA comes from Birmingham Small Arms, aka English threading. English threading on mountain bikes means a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor or RaceFace, to fit in the tight space of this 30mm spindle. CeramicSpeed Coated Bearings are hand-built with unique CeramicSpeed Ceramic Balls installed on coated, hardened-steel races for longer life and less bearing drag compared to standard bearings. In The Box - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet

The PF30 standard has opened design possibilities for mountain bikes. Our CeramicSpeed PF30 Shimano MTB Bottom Bracket gives you the ability to install Shimano and other 24mm diameter spindle cranks on your PF30 MTB. Our PF30 cups have extended sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system. There is both a Standard and Coated version. Both feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional benefit: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. If you want longer life and even lower drag, opt for the CeramicSpeed Coated Bearings. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. Performance can be tuned by changing the grease. LongLife Grease comes installed, but can be changed for lower-drag All Round Grease for lower drag and cleaner riding conditions. In The Box - 1 bottom bracket with CeramicSpeed bearings installed - 2 dust covers - 5 0.85mm spacers - 10ml syringe of LongLife Grease - Sticker sheet

BSA is equivalent to English threading. English threading on road bikes mean a 68mm-wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. English threading is easy to work with, and 24mm spindles easily fit through the shell, allowing for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet

Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter. This kit has all the pieces necessary to install 24mm diameter cranks, such as those from Shimano, FSA, and others into an ITA shell. CeramicSpeed bearings are pressed into threaded cups, then those cups are threaded into the frame. You choose whether you want yours equipped with Standard or Coated Bearings. Super-round, super-smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag. ITA BBs, thanks to the popularity of Italian road bike design, still have a following. The drive-side cup needs to be properly secured, but once that's done, the system is excellent. 24mm cranks work better when mated to our bearings. To make your bike as efficient as possible, you must reduce mechanical drag. Bottom brackets have a measurable effect on speed. CeramicSpeed balls are 100% smoother and 15% harder than the ceramic competition. They run on smoother races, too. That means our Standard Bearing BBs have 75% less drag compared to typical bottom brackets. And, the bearings last at least 3x longer than other bearings. These bearings come packed with All Round Grease. If you want less drag and are riding in cleaner environs, install lowest drag TT and Track Grease. If you're riding in wet conditions, more durable LongLife Grease can be put in. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of All Round grease - Sticker sheet

Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #4 is designed to mate the ThreadFit 24 bottom bracket with a 24mm spindle - Spindle Interface Type: Shimano Hollowtech II - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #6 is designed to mate the ThreadFit 24 bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #1 is designed to mate the ThreadFit 30 bottom bracket with a DUB MTB 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #2 is designed to mate the ThreadFit 30 bottom bracket with a DUB road 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #3 is designed to mate the ThreadFit30 bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

The Chris King ThreadFit T47 24i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24i fits 86mm and 92mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24i bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 86 , 92 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 24x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24x will fit 68mm and 73mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24x bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 30i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 30i will fit 68mm, 73mm, 83mm, 86mm, and 92mm shell widths with 30mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #5 is designed to mate the ThreadFit T47 30i bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , Rotor 3D+ , e*Thirteen P3 Connect , Zipp Vuma - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 30x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 30x fits 68mm and 73mm shell widths with 30mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #5 is designed to mate the ThreadFit T47 30x bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 30x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 30x fits 68mm and 73mm shell widths with 30mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #5 is designed to mate the ThreadFit T47 30x bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi

Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you're running the best crankset on the market, you should have the performance BB to match. - Thinner and lower viscosity bearing grease for higher durability at high speeds - In-house testing procedure includes developing a 24-hour continuous water invasion test - Offered in a variety of types for better compatibility - 386 EVO 46mm Press fit, 30mm Spindle, 103gm, 86.5mm

Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you’re running the best crankset on the market, you should have the performance BB to match. - Thinner and lower viscosity bearing grease for higher durability at high speeds - In-house testing procedure includes developing a 24-hour continuous water invasion test - BB86 41mm Press fit, 30mm Spindle, 66gm, 86.5mm

Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g

MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA

The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles. - Die cast and CNC-machined alloy bearing cups - 19mm I.D. - BB86/92 compatible - BB Shell Width (mm): 92 - Bottom Bracket Shell I.D.: 41

This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame. - Intended for road use - Steel bearings

- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086) - Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II - BB Shell Width (mm): 79 – 84.5 - Bottom Bracket Shell I.D.: 46 - BB/Frame Interface: BBright Direct Fit

FSA MegaExo Bottom Bracket - MegaExo cranks to press fit BB89.5 and BB92 frame - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 89.5 – 92 - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB89.5, BB92

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

There's precious little that's better than a fresh bottom bracket. This complete FSA BB30 Bottom Bracket contains 2 stainless steel bearings, 2 C-Clips, 2 dust covers, and 1 adjustment washer.

Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92

Bottom brackets from FSA for non-threaded applications. - Spindle Interface Type: FSA MegaExo 19 - BB Shell Width (mm): 86 - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86

- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options

ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA. - Forged, hollow chromoly spindle with titanium nitride coating - Integrated, large ball bearing design - Cold-forged aluminum cups - Includes crank bolts

FSA is proud to introduce the Premium Series, featuring high-quality headsets and bottom brackets meticulously designed to meet the demanding needs of today's bicycle constructors and customers. Precision CNC products and high-quality bearings are the key points of the brand new Premium Series, developed to reach better customer service and the highest level of performance. - Premium BSA bottom bracket to suit road MegaExo 24mm cranksets - High-quality bearings for minimum friction and maximum durability - Precision CNC - High-quality bearings - Crankset standard: Mega Exo 24mm - Frame standard: BSA 68mm

Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket. - 2 lines of bearings on each side

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

- Enables the use of a MegaEVO (30mm spindle) crankset on a 68mm English threaded frame - Compatible with Gravity Gradient MegaEVO 30mm cranks

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

- Die Cast then CNC-machined alloy bearing cups - Composite DI2 compatible adjustable center sleeve - 100mm for Fat Bikes - For use with 100mm MTB NBD MegaExo cranksets - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 100 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

- Spindle Interface Type: 386 EVO - BB Shell Width: 68mm - Bottom Bracket Shell I.D.: 46mm - BB/Frame Interface: T47 - Weight: 95g

- Enables the use of a BB386EVO (30mm spindle) crankset on a 68mm English threaded frame

- Fits 48-spline 19mm spindles - Includes 2 bearings, 2 covers (mid), or 2 cups/lockrings (Euro), center spacer, and all necessary shim spacers - European model also includes B.B. cups

Stainless steel bearings for less friction and greater durability. Fits 89.5, 92, 104.5, 107 and 121mm bottom bracket widths. Designed to suit cranks with a 30mm axle in a Press Fit 41mm bottom bracket shell. **NOTE** 30mm PF41 bottom bracket does not use a threaded centre tube. Weight 77g.

KEY FEATURES - External bottom bracket designed for threaded bottom brackets - The machined aluminium cups hold stainless steel cartridge bearings in stainless races - High quality stainless steel bearings give a much greater life span than stock units - Cartridge bearings are replaceable - Suitable for 68, 73, 83, 100 and 120mm width bottom brackets - Options designed to suit 24mm or 30mm crank axles - 30mm only: Please note specific fitting tool (HTT188) needed to fit bottom bracket. Available separately - Available with replaceable stainless bearings for less friction and greater durability - Suitable for road, mtb, DH and fatbikes - Free running labyryinth seal protects bearings and has less drag - Weight 24mm: 110mm | 30mm: 102g **Note - Some Power Meter cranks do not offer the clearance required over the BB cup, please ensure there is clearance before fitment.**

KEY FEATURES - External bottom bracket designed for threaded bottom brackets - The machined aluminium cups hold stainless steel cartridge bearings in stainless races - High quality stainless steel bearings give a much greater life span than stock units - Cartridge bearings are replaceable - Suitable for 68, 73, 83, 100 and 120mm width bottom brackets - Options designed to suit 24mm or 30mm crank axles - For 30mm models: Please note specific fitting tool (HTT188) needed to fit bottom bracket. Available separately - Available with replaceable stainless bearings for less friction and greater durability - Suitable for mtb, DH and fatbikes - Free running labyryinth seal protects bearings and has less drag - Weight 24mm: 110mm | 30mm: 102g **Note - Some Power Meter cranks do not offer the clearance required over the BB cup, please ensure there is clearance before fitment.

T47 is a new bottom bracket standard, currently popular with custom frame builders and starting to be adopted by larger frame manufacturers. Fitted with high quality seals and bearings, our T47 Bottom brackets share the same high-quality design and durability as the rest of our range. KEY FEATURES - Two different types: 24mm or 30mm axles - CNC machined aluminium cups - Centre tube optimised for internal cable routing - Full stainless-steel bearings - 68/73/86.5/89.5/92mm BB shell compatibility - Easy to service and replace bearings - Available with replaceable stainless bearings for less friction and greater durability - Two different types: One designed to suit cranks with 30mm axles and one for 24mm axles. - T47 30mm bottom brackets use our existing 30mm BB tool HTT0015S. The tool was modified at the beginning of August 2019, only tools produced after this will work with T47 BB cups. Revised tools are still fully compatible with our 30mm threaded BB cups. - T47 24mm bottom brackets use our 24mm BB tool HTT179.

- High quality alloy cups compatible with IRD QB55 bottom brackets (sold separately) - Choose Swiss, French, or Italian bottom bracket thread dimensions - Left cup: right hand thread - Right cup: left hand thread

- High quality sealed cartridge bearings with steel cups - Traditional square JIS 2-degree taper crank-arm interface - 68/73mm English (BC1.37 x 24tpi - RH/LH). Compatible with IRD retrofit cups (sold separately), RD-419

High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts

Designed to work flawlessly with your Patterson crank, this Metropolis bottom bracket delivers smooth performance and light weight.

- Designed for fat tire bikes - Chromoly spindle - Sealed bearings

Pedal smoothly and steadily with Origin-8's Torqlite Square-Taper Bottom Bracket. The forged aluminum body and cups are light and tough, the CNC'd hollow-chromoly spindle is stiff and shaves more grams, and the sealed bearings are super smooth and durable.

Forged and CNC machined AL6061 cups - Double sealed replaceable bearings - Fits 68mm and 73mm shell widths - 1.37" x 24T English thread - Alloy spacers included for chainline adjustment - Anodized and laser etched finish

Origin-8's BB30 Adapters allow you to convert your bicycle so that you can install a SRAM GXP or Shimano Hollowtech II BB30 crankset with a 24mm-diameter spindle. These Adapters include machined-aluminum cups, super-smooth and durable sealed bearings, shims and C clips.

Aluminum cups - Fits BB86 and BB92 - Includes shims for GXP - SHIMANO Equivalent SMBB-72-41B / SMBB-71-41A - Shell: 86mm - Spindle Type: HT2/GXP - Weight: 103g

- Forged and CNC machined AL6061 thread-in cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Designed for installing SRAM DUB 28.99mm spindle cranks into BSA threaded frames - Shell: 68/73mm - Interface: ENG - Spindle Type: DUB - Cup Material: AL6061 - Weight: 100g

Origin8's Revolvr BB86/92 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups offer a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. Models are available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles. - Replaces all standard BB86/92 press-fit bottom brackets - Shell: 86-92mm x 41mm - Interface: BB86/BB92 - Cup Material: AL6061/Nylon Fiber - Weight: 103g

- Replaces standard BB90/95 press-in bearings commonly found on Trek bicycles with a solid, unified thread-together bottom bracket interface - Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are serviceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Requires a special tool for installation (P/N# 610756)

Origin8's Revolvr thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life. Their hybrid AL6061/Nylon fiber cups deliver a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing Shimano HTII 24mm or SRAM GXP 22/24mm spindle cranks into BB30 frames without the need for adapters - Shell: 68-73mm x 42mm - Interface: BB30 - Material: AL6061/Nylon Fiber - Weight: 123g

Origin8's Revolvr PF30 Outboard Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups provide a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing Shimano HollowTechII 24mm or SRAM GXP 22/24mm spindle cranks into PF30 frames without the need for adapters - Shell: 68-73mm x 46mm - Interface: PF30 - Cup Material: AL6061/Nylon Fiber - Weight: 138g

Origin8's BB386 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Its hybrid AL6061/Nylon fiber cups offer a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable. - Designed for installing Shimano HollowTechII 24mm or SRAM GXP 22/24mm spindle cranks into BB386 frames without the need for adapters - Shell: 86.5mm x 46mm - Interface: BB386 - Cup Material: AL6061/Nylon Fiber - Weight: 135g

- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - OS versions are designed for use in frames with worn-out, oversized bottom bracket shells - Hybrid AL6061/Nylon fiber cups for a superior fit and noise free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles - Replaces all standard BB86/92 press-fit bottom brackets - Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups