Helmets

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

PROTECTED ALL AROUND With the AirDrop, ABUS offers its first full-face helmet that provides the best protection even for your most daring jumps. Enduro racers, downhillers, E-MTB riders and alpine adventurers are always pushing the limits of mountain biking. Increased protection used to mean heavy, hot and claustrophobic full-face helmets. The ABUS AirDrop, by contrast, features ASTM-certified DH safety levels with exceptional ventilation and trail-friendly weight. New technologies like our EVA collarbone protector inserts, breakaway visor attachments and side communication channels bring real benefits to bike parks and the backcountry. If gravity is the thrill you need, the AirDrop is the MTB helmet for you. - In-mould manufacturing for a durable connection to the outer shell with shock-absorbing helmet material (EPS) - Zoom Ace FF: Adjustment system to fit the head circumference - Collarbone protection edges - QUIN ready—easy upgrade with the separately available QUIN chip - Breakaway visor bolts - ASC—ABUS communication channels increase spatial awareness - Breathable cheek pad inserts - Design suitable for spectacles - Double D-ring buckle system - Ventilation: excellent ventilation through 11 air inlets and 6 air outlets

FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle

- Classic BMX/Skate style - 11 vents help keep you cool - FitRite retention dial for one-hand adjustment - Adjustable chin strap - Available in Youth sizes S/M (48-54cm) and L/XL (55-58cm)

This is a replacement of the ANGi-ready Hairport FSL II fit system found on Echelon II helmets. - Replacement ANGi-ready fit system.

Ambush II Visor from Specialized.

Replacement or spare visor to fit your Speedframe Pro Helmet.

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

The Chakra Child features Kali's Composite Fusion technology, in-mold construction, and extended rear coverage for added safety and protection. A visor molded directly into the shell and a dial closure system will give any child the confidence and motivation to get out and ride. - Washable, anti-microbial, moisture wicking pads - Polycarbonate shell with EPS foam - Integrated visor - 21 vents provide maximum airflow

Replacement pads for all Specialized Chamonix helmets Model Year 2014 to present.

Replacement visor for all Specialized Shuffle youth size helmets.

Replacement visor for all Specialized Centro helmets.

Replacement pads for all Specialized Shuffle Child helmets.

The Pedelec 2.0 offers an uncompromising combination of comfort and protection. Complemented by clever features, it is the ideal companion when cycling in road traffic. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Forced Air Cooling Technology ventilation system keeps you cool and comfortable with 4 air inlets and 9 air outlets connected with flow channels - Zoom Ace Urban adjustment system with handy adjustment wheel for a customizable fit - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - High visibility due to powerful reflectors and an integrated LED taillight with 180-degree visibility - Foamed-in fly nets keep insects out - Lower edge protection provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Ponytail-compatible and well suited for braided hairstyles Sizing: - Medium: 52 – 57cm - Large: 56 – 62cm

For maximum safety, the Viantor has the ActiCage structural reinforcement integrated into the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. - ActiCage allows for large ventilation openings without compromising the helmet's safety - Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Zoom Ace fit system with a non-slip adjustment wheel - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and fit - Ponytail-compatible and well suited for braided hairstyles Sizing: - Small: 51 – 55cm - Medium: 52 – 58cm - Large: 58 – 63cm

All the elements come together in a Composite Fusion trail helmet that is light yet so comfortable you'll forget you're wearing it. Features LDL, Kali's proprietary multi-G impact technology. - Break-Away Moto Style Visor - Removable/Washable Liner - Anti-Microbial Pads/Bug Liner - Locking Buckle & Sliders - Micro-Fit Closure System Material: - PC Shell & Under wrap - EPS Foam Certifications: - CPSC - EN 1078 Sizing: - Small/Medium = 55 – 61cm - Large/X-Large = 60 – 63cm

The MET Hooray MIPS Helmet is safe, comfortable and has plenty of toddler-specific features that will protect the next generation of cyclists. The shell of the MET Hooray MIPS has a purposely flattened part at the back in order to be comfortable in any child seat. It also covers a large part of the two most sensible brain areas; the back and the temples. The internal shape features an engineered air channeling system to facilitate airflow, while MET's unique Bimbi Secure Technology ensures that there's no pressure points on the fontanel. Thanks to the new MET Safe-T Bimbo, the helmet will grow with the child's head. The retention system is easily adjustable due to the grippy nub, and the 360° head belt ensures a stable and secure fit. The ratchet buckle makes it easy to secure the helmet and avoid unexpected pinches on the skin. - In-mold polycarbonate shell with EPS liner - Extended head coverage and integrated visor for all-round head protection - MIPS-C2 rotational management system to increase protection against certain impacts - Fontanel protection thanks to MET Bimbi Secure Technology - Anti-pinch ratchet buckle makes it easier to secure the helmet - Internal engineered air channeling system features 10 vents to improve ventilation and comfort - MET Rear LED Light, 4 Spotlights, 60h Life - Reflective rear decal to enhance visibility - Design compatible with child-seat - MET Safe-T Bimbo Fit System with 360° head belt to follow the growth of the child - Straps with adjustable dividers ensure a custom fit - Anti-insect net embedded into the front vents - Hand washable comfort pads - Intended Age: 6-8 Years of Age Sizing: - X-Small = 46 – 52cm - Small = 52 – 55cm

The MET Roam MIPS is designed for all-mountain and enduro riding. The back of the head and the temples are especially in need of protection from impact, so we’ve increased the coverage around these key areas, without sacrificing the helmet’s light weight. The injection-molded visor is flexible to adapt to the shell of the helmet in a crash. This unique feature helps to manage extra rotational forces transferred to your neck. There are clips on the visor and a rear edge, which keep goggle straps in place during the ride, achieving ultimate compatibility with your eyewear. Featuring the MIPS-C2 rotational management system, the Roam is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The MIPS-C2 solution separates the shell and the liner with a thin plastic Low Friction Layer (LFL). The Roam Mips features 22 vents that work together with the purpose-built internal channel to provide optimal airflow at high and low speed. The MET Roam has also been rewarded for its comfortable fit. The inner padding has an extended surface area which provides the perfect stability without disturbing internal airflow. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - Exceptionally comfortable and secure on the head thanks to a refined internal shape and stabilizing inner padding - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Orbital Fit System - The 360° head belt with vertical and occipital adjustments help to maximize adjustability - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Integrated goggle strap clips and sunglass ports to securely dock eyewear when climbing or resting - 22 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 62cm

The MET Terranova MIPS is designed for trail and eMTB riding. The construction and fit are inspired by MET's Roam helmet, guaranteeing optimal comfort. The increased head coverage ensures a higher level of protection around the two most sensitive brain areas: the back and the temples. Featuring the MIPS-C2 brain protection system, the Terranova is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The tool-free adjustable visor is injection-molded to flex and bend when there is an impact against it. This unique feature helps to manage extra rotational forces transferred to your neck in a crash. The Terranova MIPS also features two dedicated ports to securely dock sunglasses while climbing or resting. The 360° head belt in the MET Safe-T DUO retention system ensures that there will be no pressure points on the skull and makes the helmet perfectly stable on the head while riding on rugged terrains. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T DUO Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Sunglass ports to securely dock sunglasses when climbing or resting - Exceptionally comfortable and secure on the head thanks to refined internal shape - 17 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

Features: - Helmet with 2 outer shells and 2 EPS for increased safety and a perfect fit - Outer shell made of ABS - Maximum air flow and cooling through large ventilation openings with internal ventilation channels - Clear lacquer-sealed decors in high-quality color qualities - Comfortable, preformed and padded Dri-Lex inner lining with antibacterial Polygiene treatment, removable, sweat-absorbing and washable - Easy and quick removal of the cheek pads thanks to the emergency tabs - Secure eyeglass strap guidance thanks to the pre-formed shell design - Standard with break-away plastic umbrella screws for more safety in the event of a fall - IPX ACell's rotational impact absorption technology - GoPro mount included - Meets the safety standards EN1078 and CPSC for bicycle helmets

Be so bold in the all-new Ambush 2. Fully redesigned from the buckle up with essential features for next-gen trail riding, the Ambush 2 channels ample ventilation through modern styling, with a superb fit and dialed eyewear integration. - Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Sized to drop in with a highly customizable fit and precision adjustment. The Ambush 2 features our SBC Integrated Fit system and adjustable Tri-Fix splitters to provide a dialed fit. - Fine-tune your vision using the Ambush 2’s Occipital Base Adjustment to precisely adjust how the helmet sits on the brow for seamless integration with goggles and glasses for an unrestricted view down the trail. - Innovative sunglasses storage with hidden rubber flaps maintains a secure, rattle-free fit, keeping your glasses safely stored when you need to get them out of the way during long climbs or moments of rest. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet, drawing heat away from the head. 4D brow cooling, which provides a gap between the helmet and forehead, draws airflow into internal air channels at every speed. - Integrated fixed visor with a breakaway feature provides increased trail vision and a seamless interface with eyewear while effectively channeling airflow through the helmet for superb ventilation. - Strategically optimized dual-density EPS foam eliminates bulk and reduces excess weight. - The Ambush 2 earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Features the MIPS SL solution with our exclusive perforated backing. Integrating MIPS technology within the helmet padding reduces moisture retention while increasing breathability. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Average weight: 360 grams (medium).

The most advanced piece of technology on your bike is the one attached to your shoulders. That's why the new Mode helmet is designed to fit just right and keep you feeling, and looking cool. Its clean, elegant lines deliver more than modern style, and they integrate hidden vents for increased airflow, so you stay cool even when the temps rise. A seamlessly integrated fit adjustment system and personalized sizing lets you create a fit that's, well, dialed. Take on the city, head on, with Mode. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Hidden vent integration helps cool you off when the heat is on. - The integrated fit adjustment system delivers a personalized fit and occipital base adjustment. - Mode is offered in three shell sizes and two headforms for distinctive fits: Classic SBC headform and Round Fit headform. - Mode earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Whether you're riding acoustic or electric, Mode passes the Dutch e-bike Standard NTA8776 so you can ride with confidence. - Reflective decals and Stix Light compatibility makes for seamless day and nighttime visibility. - MIPS-equipped and ANGi ready.

Riding is for everyone, so we created the Camber to provide a dialed fit for rippers of all sizes, from kids on up. The Camber comes equipped with all the comfort, style, and ventilation to make every ride a joyride. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Camber earned the highest 5-Star Virginia Tech® Helmet Rating™ from internationally renowned Virginia Polytechnic Institute and State University. - The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. - With x-small to x-large options spread across five unique shell sizes, the Camber eliminates excess bulk to deliver a comfortable and streamlined fit to a full range of riders. - Easily-adjustable, one-size Headset SX fit system with adjustable Tri-Fix web splitters delivers an easy and accurate fit. - 4th Dimension Cooling System optimizes ventilation. - In-molded shell improves strength and reduces weight. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Average weight: 370 grams (medium).

The most advanced piece of technology on your bike is the one attached to your shoulders. That's why the new Mode helmet is designed to fit just right and keep you feeling, and looking cool. Its clean, elegant lines deliver more than modern style, and they integrate hidden vents for increased airflow, so you stay cool even when the temps rise. A seamlessly integrated fit adjustment system and personalized sizing lets you create a fit that's, well, dialed. Take on the city, head on, with Mode. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Hidden vent integration helps cool you off when the heat is on. - The integrated fit adjustment system delivers a personalized fit and occipital base adjustment. - Mode is offered in three shell sizes and two headforms for distinctive fits: Classic SBC headform and Round Fit headform. - Mode earned the highest 5-Star Virginia Tech® Helmet Rating™ from the internationally renowned Virginia Polytechnic Institute and State University. - Whether you're riding acoustic or electric, Mode passes the Dutch e-bike Standard NTA8776 so you can ride with confidence. - Reflective decals and Stix Light compatibility makes for seamless day and nighttime visibility. - MIPS-equipped and ANGi ready.

MOTO CERTIFIIED FULL-FACE HEAD AND BRAIN PROTECTION The safest and most comfortable full-face helmet money can buy. We all crash. Sometimes hard, and sometimes even harder! Leatt helmets feature 360° Turbine Technology reduces both rotation acceleration and concussion level impact energy to your head and brain! Do not be afraid to push your limits. Once on your head, you will quickly forget you are wearing a helmet. The Pro-Fit modulating comfort liner stretches over your head to provide superior comfort and stability, even on the roughest of terrain. ASTM certified and passed the Motorcycle ECE standard, the Leatt 8.0 helmet provides an unbeatable combination that makes all Leatt riders winners! So, the next time you crash, see to it that you are protected by the best! - Composite shell in three sizes - Passed Motorcycle impact Standard - Incredible comfort due to Pro-FitTM modulating comfort liner - Impact absorbing foam in 4 densities for ultimate reduction of forces to head and brain - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Moisture wicking, breathable, anti-odor and washable liner fabric - Optimal neck brace compatibility - Maximized ventilation effective even at very low speeds - Visor with breakaway function for rotational reduction in a crash - Includes Visor extension - Emergency cheek pad removal - Hydration ready (with optional hands-free kit) - Certified and tested: ASTM F1952–10, EN1078, CPSC 1203, AS/NZS 2063:2008. - Passes Motorcycle ECE 22.05 - Weight: - From 1.120 ± 50g (2.47lbs) - Plastic Free Recyclable Packaging - Sizing #S (55-56cm – 21 ?"-22") #M (57-58cm – 22 1/2"-22 3/4") #L (59-60cm – 233/4"-23?") #XL (61-62cm – 24" – 24 1/2")

- Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Crash release visor system - Easy position visor, no bolts needed - D Ring closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 57 – 58cm - Medium = 59 – 60cm - Large: 61 – 62cm - X-Large: 63 – 64cm - XX-Large: 65 – 66cm

Replacement Cheekpad for Gambit

Replacement Padset for Gambit

Replacement Visor for Gambit

Replacement Padset for Mode

Replacement pads for all Tactic 3 helmets.

Replacement Padset for Tactic 4

Replacement visor for all Tactic III helmets.

- Lower rear coverage offers added protection off-road - Detachable visor - FitRite retention dial for one-hand adjustment - 11 large vents maximize air flow - Available in Adult sizes S/M (54-58cm) and L/XL (58-62cm) - Certification: CPSC, EN1078

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. WEIGHT: 280g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Rollsys System (ARS) VENTILATION: 18 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: Optional Aeroshell Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Lazer Aeroshell compatible Multi use polycarbonate cover which fits over top of your helmet. It covers the front and side vents to protect your head from rain and cold or to gain an aerodynamic advantage. Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Rollsys System (ARS) Easily adjust your helmet's fit by using the thumbwheel on the top of the helmet. Lazer's unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of the head. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Well ventilated Carefully designed vents and internal channeling pull air into the helmet and across your head for increased airflow. Essential for performance and comfort during high temperatures and hard efforts.

The MET Trenta 3K Carbon Mips® is a high performance road helmet designed with elite cyclists and worn to victory at Le Tour de France and the monuments of Liège-Bastogne-Liège and Il Lombardia. Engineered to keep your head fresh and save you energy with every pedal stroke, the MET Trenta 3K Carbon Mips® is the most advanced road cycling helmet we have ever made, now upgraded with the addition of Mips AIR®, the lightest and most advanced rotational management system.

Replacement pads for all S-Works Evade II MIPS helmets.

The Tone helmet looks good and works (even) better. Mindfully designed for good looks and dependability, Tone redefines how a bike helmet looks when it performs. An integrated fit system with Tri-fix webbing adjustment makes it easy to set your fit and get on your way, while internal channels keep air moving as you briskly ride along in comfort. Leaving the business to the inside, Tone gives you all the right reasons to get outside, from a commute to everyday cruising. - Easily adjustable, Headset SX fit system with adjustable Tri-Fix web splitters delivers an easy and accurate fit. - Internal channeling promotes airflow. - Tone is offered in three shell sizes in the Classic SBC headform. - Tone earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Reflective decals make for seamless day and nighttime visibility. - Equipped with MIPS, a system featuring a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. - ANGi crash sensor ready. - Complies with the U.S. CPSC Safety Standard for Bicycle Helmets for persons age five and older.

- Lightweight ABS Shell - 17 vents provide cool air intake and heat exhaust - Large eye port for greater field or vision and improved goggle fit - Complies to CE SPSC and AS standards - Third party online sales strictly prohibited by manufacturer

- Provides increased coverage improved venting lighter weight and a sleeker profile than its predecessor while managing energy more efficiently over a broader range of energy demands - The ATB-2T reduces angular acceleration energy transfer

Five steps up from your standard trail helmet! A lightweight all-purpose MTB helmet for trail riding, cross-country training, and backcountry or gravel adventures. This helmet is well-ventilated with maxiflow air channels and the Dri-Lex® liner is washable, moisture-wicking, anti-odor, and breathable. What is most important about the Leatt MTB 2.0 helmet is the head and brain protection level it offers. Featuring 360 Turbine Technology, the helmet is lined with turbines which are 360 °moving discs constructed from an energy-absorbing foam and material. This tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at the concussion level. Be comfortable and ride safely. Details: - Lightweight Polymer Compound shell in three sizes - MaxiFlow impact foam air channels are effective even at low speed - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - In-molded impact foam for great energy absorption - Maximized ventilation with 20 vents - Visor with breakaway function for rotational impact force reduction - Dri-Lex® moisture-wicking, breathable, anti-odor, and washable inner liner - Weight: from 300g (0.65 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203

The Bluegrass Legit Carbon Helmet is a premium race-day full-face helmet. Developed for competitions, it exceeds all of the certifications for racing downhill and enduro. - The Legit Carbon features a flexible safety-release visor to avoid twisting of the neck in impacts from any angle. - Designed with hearing vents to help riders maintain balance and hit their optimum performance levels - The Legit Carbon uses a carbon fiber outer shell paired with a multi-impact EPS liner to achieve the finest blend of high-impact performance and low-weight - Vents and air channeling are optimized for all-day park sessions, with two large exhausts working in synergy with the EPS channels, to keep you cool at both high and low speeds - Featuring the MIPS E5-4® brain protection system, the BLUEGRASS Legit Carbon is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion - The Legit Carbon is suitable for all head shapes and sizes, thanks to its meticulously refined internal shaping - The comfort is boosted even more by the snap-in soft padding - Durability and quality are enhanced by an injected PU foam paired with the chin guard and three polycarbonate shells strategically molded on the EPS liner

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. Two sets of our breathable foam pads ensure a custom fit for each rider's personal needs. Our 10 vent shell was designed to be lightweight and offer the rider great ventilation without compromising the helmet structure and durability. With such attention to detail, it's no surprise that the Classic helmets surpassed all EN and CPSC standards while being vigorously laboratory-tested to the highest possible degree. - ABS Hardshell construction with light EPS core liner - Shadow Crow Head rivets and Classic woven label - Adult sizes include 2 sets of padding for a custom fit - Surpasses all CE & CPSE Standards - Weight: 400 grams - Sizes: XS (46-50 cm), SM/MD (50-56 cm), LG/XL (56-61 cm), 2XL (61 65cm)

Key Features: - Mips® equipped - BOA® Fit System to fine-tune your fit - FIDLOCK® SNAP magnetic buckle for quick and secure operation - Integrated sunglasses holder Versatile, lightweight trail helmet The all-new Crossframe Pro Helmet is bred for elevated heart rates, ?at-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® and BOA®, this helmet is ready for any trail that you are. Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and - redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - FIDLOCK® SNAP helmet buckle provides quick and secure entry and exit, even while wearing gloves - Strap divider adjustment for repositioning the angle of the chinstrap - Removable, washable Ionic+® liner is anti-microbial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - BOA® Fit System with micro-adjustability allows you to fine-tune your fit on the fly - Rear cradle adjustment for setting the BOA dial to an ideal position - TPU vent inserts to keep your sunglasses securely stored when not in use

Designed with the speed of pro riders in mind, the Bluegrass Rogue Core MIPS is sharp, bold, and alternative. It's designed to properly protect the most sensitive head areas, the back, and the temples. - The Rogue Core Mips exceeds worldwide certifications and performs best at both linear and rotational impact thanks to its meticulously engineered EPS shell and the MIPS-C2® brain protection system attached inside the helmet - The visor is designed to enhance safety and protect from branches - In the event of a crash, the visor will adapt to the shell of the helmet to help withstand extra rotational forces transferred to the neck - The Safe-T Heta retention system provides an exceptional fit and keeps the helmet stable on the head - The 360° head belt ensures that there are no pressure points on the skull, while vertical adjustments provide a custom fit - The edge at the back of the helmet is designed to properly keep the goggle strap in place - Sunglasses can be securely docked into the two visor vents - The straps anchors are embedded into the EPS and you can quickly fasten them thanks to the Fidlock® magnetic buckle, even while wearing gloves

Full coverage open-face mountain bike helmet. Bump up your protection level for enduro and trail riding with the top-rated Dropframe Helmet, delivering added coverage for your head, ears, and jaw. This 3/4 enduro helmet features Mips® protection, our dual-density Varizorb™ EPS liner, and more coverage than a traditional open-face helmet. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Removable anti-microbial and moisture-wicking liner - Includes additional pads for a custom dialed fit Materials: 31% EPS, 16% TPE, 14% polycarbonate, 10% PA, 6% polyurethane foam/polyester *Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel

The Bluegrass Legit Helmet is a budget-friendly full-face helmet equipped with many racing-inspired features. - Fiberglass outer shell with EPS liner for optimal fit - Safety-release visor system includes a flexible visor to manage twisting forces - Includes 11 vents and a breathable chin guard for comfort - Designed with hearing vents to help riders maintain balance and hit their optimum performance levels - Allows for a wide field of vision and is goggle-compatible - Soft back-head support makes this helmet exceptionally comfortable - Fully removable, hand-washable padding - MX-style straps and a double-D buckle

- Direct Flow Cooling guides airflow into ultra-deep internal channels optimizing ventilation at high and low speeds - Moto-style extended protection visor is infinitely adjustable and removable - Integrated goggle strap retainer helps goggles stay in position - Low and high speed impact-tuned construction with optimized EPS density, and super-tough polycarbonate shell - ESS brings together CINCH Pro, Optimal Position Y, and LiteForm webbing for the best straight-out-of-the-box fit and comfort - TransTextura PLUS X-odor anti-microbial pads - MIPS is a low friction layer between the head and the helmet that provides added protection with respect to angled impacts - Women's

Sleek styling, cool graphics, and youth-oriented sizing make the Shuffle Youth LED helmet the perfect choice for your kids—day or night. You'll also find that it's equipped with next-level protection courtesy of revolutionary MIPS technology (Multi-Directional Impact Protection System). - MIPS-equipped. - Integrated LED tail light for increased visibility in in both bright and low-light conditions. - Headset SX fit system with youth oriented sizing that's designed for an easy and accurate fit. - 4th Dimension Cooling System to optimize ventilation. - In-molded shell improves strength and reduces weight. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing for increased visibility in low-light conditions. - Stylish, youthful designs complement our bike graphics and colors. - Patented clip-on visor included.

Ride smart. It's a no brainer. If you're going to rock a helmet on an Electra, rock an Electra on your helmet. Choose between awesome colors and graphics that fit your style. Electra helmets: Making messy hair cool since 2016. - Durable ABS hardshell for protection and EPS foam liner for security - Size small fits circumference 48cm - 54cm and hat sizes 6 1/2 - 6 3/4 - Size medium fits circumference 55cm - 58cm and hat sizes 6 7/8 - 7 1/4 - Size large fits circumference 59cm - 61cm and 7 3/8 - 7 5/8 - Small size generally fits children while medium and large sizes fit adults - Fit System: HB-80 - Pad Material: Moisture-wicking pads - Buckle Type: Standard buckle

MET Miles MIPS is a touring helmet with road spirit. It has a comfortable shape and plenty of vents to enhance air flow. Featuring the MIPS-C2 brain protection system, the Miles is able to slide against the head in the case of a crash, redirecting damaging rotational motion. MIPS is engineered to add extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The unique 360° head belt ensures that there will be no pressure points on the skull, allowing you to achieve the perfect fit. - In-mold polycarbonate shell with EPS liner - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - Safe-T Twist 2 Fit System - 360° head belt and vertical adjustments offer a customized fit - Straps with an adjustable divider provide a customized fit - Reflective rear decal to enhance visibility - 18 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - Reflective rear decal - Certifications: CE; AS/NZS; US Sizing: - Small/Medium = 52 – 58cm - Medium/Large = 58 – 61cm

The MET Parachute MCR is MET's convertible full-face helmet developed for enduro, all-mountain and e-MTB riding. Parachute MCR is designed to be truly two helmets in one. The full-face has a stylish and aggressive look providing all-round protection, while the open face reflects the style of MET's all-mountain helmets. MCR stands for Magnetic Chinbar Release and instantly converts from full to open face helmet and back. MCR is MET's revolutionary system created in partnership with Fidlock. Featuring the MIPS brain protection system and complying with ASTM 1952-15/2032-15 (shell and chinbar), riders have the highest level of protection from linear and rotational impacts. In addition, MET's unique flexible injected visor to avoid extra rotation of the neck in case of a crash. The BOA FS1 offers incremental adjustment forward and backward to deliver a precise and adaptable fit, while the belt runs 360° around the head to avoid any pressure points, optimizing comfort. It also offers 3 positions for vertical adjustment. 21 vents and the MET engineered internal air channeling work in synergy with the breathable chinbar to maximize the airflow at low and high speed. The chinbar is engineered to reach the optimal balance of stiffness and energy dissipation to give riders confidence when wearing the Parachute MCR. - In-mold polycarbonate shell with EPS liner - MCR Magnetic Chinbar Release System allows the helmet to easily convert from a full face to open face design - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - ASTM 1952-15/2032-15 certified shell and chinbar provides additional safety - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Breathable chinbar is covered with a durable injected PU foam - Removable cheek-pads (2 sizes included) allow you to achieve the perfect fit - BOA-FS1 Fit System with 360° head belt and vertical adjustments offer a customized fit - Fidlock Magnetic Buckle makes it easier to secure the helmet - 21 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications: CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. - ABS Hardshell construction with light EPS core liner - Includes two sets of padding for a custom fit - CE and CPSE certified - Shadow Crow Head rivets and Classic woven label - X-Small = 46 – 50cm - Small/Medium = 50 – 56cm - Large/X-Large = 56 – 61cm - XX-Large = 61 – 65cm

The MET Eldar MIPS has been re-designed for young riders who are fearless and skilled. A high quality helmet for those who aspire to ride the Enduro World Series one day. With extended coverage of the head it offers ultimate protection for those who dare to do more. Featuring the MIPS-C2 brain protection system, the Eldar is able to slide against the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - Extended head coverage for more thorough protection - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to its refined internal shape - 14 vents are internally engineered for air channeling to improve ventilation and comfort - MET Safe-T Twist 2 Fit System - 360° head belt reduces pressure points on the head - Straps with adjustable dividers offer a customized fit - Reflective rear decal to enhance visibility - Comfort pads are hand-washable - Weight: 305g Sizing: - One Size = 52 – 57cm

The Kali Protectives Maya 3.0 is an upgraded version of Kali's best-selling Maya helmet. It includes new features such as a dial retention fit system, added venting, and a newly designed visor. - LDL (Low Density Layer) technology is used throughout the interior of the helmet to reduce rotational impact forces up to 25%, and reduce low-g linear forces up to 30% - Composite Fusion Plus technology incorporates layers of multi-density cone shaped EPS foam to absorb different levels of impact and direct energy sideways and away from the brain - Removable/washable liner - Anti-microbial pads - Flex moto-style visor - Bug liner - Locking buckle and sliders - Dial rention fit system

The MET Manta MIPS defines the MET aesthetic with its highly contemporary design and aerodynamic engineering. Featuring the MIPS-C2 rotational management system, the MET Manta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add at least 10% extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The Fidlock magnetic buckle makes it easier and faster to fasten the helmet. Despite being primarily an aero helmet it is also well ventilated. We've engineered the internal shape to channel the air, while MET's signature NACA Vent works in synergy with the specially positioned exhaust ensuring a constant airflow through the helmet, without catching the wind and creating drag. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - Fidlock Magnetic Buckle makes it easier to secure the helmet - 15 vents are internally engineered with an air channeling system to improve ventilation and comfort - Sunglasses ports securely dock sunglasses when climbing or resting - Tube-shaped tail to improve aerodynamics - Reflective rear stickers - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

The MET Trenta MIPS a performance road helmet engineered to maximize ventilation and save you energy with every pedal stroke. Featuring the MIPS-C2 rotational management system, the MET Trenta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. Scientifically designed air vents harness the power of the Venturi effect, pushing out warm air within the helmet through specially positioned exhausts to ensure constant airflow. The tail of the helmet also features an aerodynamic design to effectively drive airflow. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - 19 vents and an internal air channeling system are engineered to improve ventilation and comfort - Sunglass ports securely dock sunglasses when climbing or resting - Tube-shaped tail improves aerodynamics - Limited contact with the surface of the head helps to maximize the ventilation - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

Ponytail-ready HairPort SL II fit system with six height positions and micro-adjustable dial for optimized fit. - Helmet not included, sold separately