Wheels

- Alloy 700c rims - Tubeless compatible using supplied rim strips and valves - 23mm wide rim for better tire performance - 30mm rim height - Stainless steel, straight pull, double butted spokes - Dynamic Balanced Lacing provides significantly higher transmission stiffness vs. traditionally laced wheels - Alloy locking nipples - Giant Alloy hub shell with pawl based driver - Centerlock disc compatible

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made from start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles, and endcaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing, and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every 0.52 degrees, yielding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools—designed to keep you in the saddle and out of the service queue

Replacement freehub kit for Hydra hubs

- Elite Series convertible fat bike hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - J-bend spoke compatible - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm Quick-Release: - LTF-L: 48.65mm - LTF-R: 48.65mm - CTF-L: 36.5mm - CTF-R: 36.5mm 12mm Thru-Axle: - LTF-L: 52.15mm - LTF-R: 52.15mm - CTF-L: 46.5mm - CTF-R: 46.5mm

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/QR Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 32.75mm LTF-R: 50.05mm CTF-L: 34.9mm CTF-R: 17.6mm Straight Pull Spoke/12mm Thru-Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 36.25mm LTF-R: 53.55mm CTF-L: 34.9mm CTF-R: 17.6mm J-Bend Spoke/QR Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 32.65mm LTF-R: 48.2mm CTF-L: 35mm CTF-R: 19.45mm J-Bend Spoke/12mm Thru-Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 36.15mm LTF-R: 51.7mm CTF-L: 35mm CTF-R: 19.45mm

- Elite Series road hubs - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - Sealed bearings - Material: AL6061 - Brake Type: Rim - OLD: 130mm Straight Pull Spoke: PCD-L: 32mm PCD-R: 52.5mm LTF-L: 27.7mm LTF-R: 50.8mm CTF-L: 37.45mm CTF-R: 14.35mm J-Bend Spoke: PCD-L: 38.5mm PCD-R: 50.6mm LTF-L: 27.45mm LTF-R: 49.05mm CTF-L: 37.7mm CTF-R: 16.1mm

If aluminum is your choice, then you should take a very close look at the PR 1400 DICUT 21. Wide, asymmetric, and lightweight rims make for an outstanding stiffness-to-weight ratio. Available in a disc brake version as well as a rim brake version it’s the perfect fit for every performance bike. The high-end, 240s-based hubs and the tubeless-compatible rims which feature sophisticated waterslide graphics ensure an elegant appearance and make it easy for you to conquer yourself, your friends, or your competitors on the next big ride in the mountains.

The No.9 Carbon GVL rim’s low rotational weight and the aerodynamic benefits of its 35mm-deep rim profile help you conserve energy over miles of rollers, false flats, and whatever else your gravel rides throw at you. The 23mm internal width pairs well with tires ranging from 32mm to 2.2-inches wide for versatility in unpredictable conditions. The asymmetric rim profile equalizes spoke tension and angles for stronger, stiffer builds, making the No.9 Carbon GVL a solid foundation for wheels that will take your gravel bike to the next level. - Recommended rider weight limit is 240 lbs. - 85 PSI maximum tire pressure on a 32c tire - Weight: 435g - For tires 32mm – 2.2-inches

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano Deore HB-T610 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24.5mm - Depth 20mm - Rim Model Mavic A719 - Skewers Included Yes

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Hand-built to A-Class specifications, the 350 wheels with SPANK Hex Drive hub is the premium lightweight performance offer from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles

- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately

At the Center of It All Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design. Power To The Pedal Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power. Overbuilt But Not Overkill With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.

- Lowest resistance hybrid ceramic (ceramic balls and steel cages) available - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Kits include Freehub body with CeramicSpeed

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

- Traction optimized wide profile rim ideal for wider tires (2.4-2.8) - Asymmetric rims and same length spokes for nearly even left/right tension - 35mm ID 34mm OD double wall 6069 aluminum rim (40% stronger than 6061) - Tubeless ready rims tires mount

- GVL stands for gravel, and Greenville, SC where Boyd wheels are handbuilt. - Prologue series wheels are built Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings. - Built with Pillar TB2018 round double butted spokes and external brass nipples, the Prologue is built to be a great budget upgrade that can be ridden hard in even the most demanding conditions.

Rims: WTB EZR i23 700C - ETRTO 622-23 - Inner width: 23mm - Made from 6069 series Aluminum alloy - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Stronger and lighter rim using a sleeved joint - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano 105 HB-RS7070 - 12x100mm E-THRU (Axle not included) - Center Lock Disc Mount - Polished angular contact bearings with Internal Grease Sleeve - Contact sealed hub Rear hub: Shimano 105 FH-RS7070 - 12x142mm E-THRU (Axle not included) - Center Lock Disc Mount - Polished angular contact bearings with Internal Grease Sleeve - Contact sealed hub and freehub body - Compatible with 11 speed Road (10 speed compatibility requires 1.85mm spacer, not included) - Assembled in North America by experienced wheelbuilders with Sapim Race Butted Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you. - 370 based hub

When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides. - Spline hub with 3-pawl system - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

- Made start to finish in Asheville, NC - Light weight and easy to service

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano XT FH-M8110-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

HED's entire line of Big Deal fat rims can now be purchased as a rim-only for the custom build of your dreams. Our demanding, discerning, and fat-loving customers have spoken: They love our Big Deal carbon rims. Nothing else offers the same combination of easy tubeless setup, stiffness, and jaw-dropping weight savings. They're utterly fat-tastic. In an effort to bring the advantages of Big Deal technology to an even wider audience, our engineers worked hard to apply the same principles to an aluminum platform. Enter: the Big Aluminum Deal and Big Half Aluminum Deal. At 80mm wide, these rims offer superb fit with all common fat bike tire sizes. They have the same patented Inflatobam tubeless technology as their carbon brethren - saving over a pound in inner tubes alone. What's the difference between the B.A.D. and the B.H.A.D.? Only the rim diameter. The B.A.D. has a 26" diameter, while the B.H.A.D. is made for larger 27.5" fat bike tires. Additional Info - Rim Type: Tubeless-Ready Clincher - Rim Width: 80mm - Rim Material: 6061 Aluminum - Rim Weight: 695g - Color: Black - Rim Hole Count: 32 - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Drill Pattern: Symmetrical Only - Decal Type: Shadow - Rim ERD: 586 (27.5"), 562mm (26"), 510mm (24")

- Tough on trail and light on price rated for everything from XC to Enduro and E-bike - Steel axles cartridge bearings robust alloy hub shell and steel cassette body - 10-degree pawl engagement - International Standard 6-bolt disc mount - *Shimano/SRAM