Accessories

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

Suspension service is a specialty within bicycle repair, and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead-in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. The problem is that you're still often left with a loose-fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch. We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. Fully CNC-machined with zero lead-in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them slipping off of the top cap under torque. - Made from billet aluminum to exacting tolerances to keep form damaging the suspension - Finger splines so you can thread it easily by hand - 3/8" square drive - Short (1"/25mm for all sizes) to reduce the chance of them coming off of the top cap under torque - Made in Bend, Oregon Applications - 24mm socket - used on SRAM top caps - 26mm socket - used on Marzocchi and Reverb sealheads - 27mm socket - used on Fox and X-Fusion top caps - 30mm socket - used on the RS-1 SRAM sealhead removal tool as well as a handful of other forks. - 6-size set covers most modern suspension forks on the market: 24, 26, 27, 28, 30 and 32mm

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges

Fit, Protection, Style After years of research and development, the Troy Lee Designs Team is proud to introduce our latest creation - the A1 helmet. Here at TLD, styling, graphics, fit, function, and safety are key in everything we create. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps, or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection, and style you want. - Reinforced polycarbonate shell in-molded with EPS liner extends down the sides and back of the head for maximum protection and durability - MIPS brain protection system reduces rotational forces to the brain - 8 pressurized intake passages draw in cool air for maximum ventilation - 8 rear vacuum vortex outlets help exhaust helmet and draw heat from head - Triple position adjustable retention system allows customized fit for various eyewear, head shape, and riding styles - Single piece, ultra plush, removable, and washable comfort liner made of anti-microbial moisture wicking material for a dry, comfortable feel - Adjustable, moto-inspired visor with anodized aluminum hardware - Race-inspired styling - CPSC 1203, CE EN 107B, AS/NZS 2063 certified - 5-Star Rated by VA Tech Testing Institute Bicycle Helmet Testing lab

Fit, Protection, Style Here at TLD, styling, graphics, fit, function and safety are key in everything we create. After years of research and development, the Troy Lee Designs Team introduced the A1 helmet in 2013. We made one of the most comfortable MTB helmets on the market even safer with the addition of MIPS rotational brain protection. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single-track, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. "The A1 Classic MIPS Helmet takes top safety honors, earning a perfect 5-star rating in Virginia Techs impact test and was the number one tested mountain bike helmet." - VA Tech Helmet Testing Lab - Featuring MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head - EPS impact liner maximizes impact protection while minimizing weight - Innovative break-away visor screws - 16 port hi-flow cooling system both pulls and pushes air for maximum ventilation - Ultra-plush quick-dry comfort liner is both removable and washable for maximum ventilation - Adjustable, cam-lock strap dividers allow customization for different head shapes and riding styles - CPSC 1203*, CE EN1078*, *Varies by regional standards

Fit, Protection, Style Here at TLD, styling, graphics, fit, function and safety are key in everything we create. After years of research and development, the Troy Lee Designs Team introduced the A1 helmet in 2013. We made one of the most comfortable MTB helmets on the market even safer with the addition of MIPS rotational brain protection. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging singletrack, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. "The A1 Classic MIPS Helmet takes top safety honors, earning a perfect 5-star rating in Virginia Techs impact test and was the number one tested mountain bike helmet." - VA Tech Helmet Testing Lab - Featuring MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head - EPS impact liner maximizes impact protection while minimizing weight Innovative break-away visor screws - 16 port hi-flow cooling system both pulls and pushes air for maximum ventilation - Ultra-plush quick-dry comfort liner is both removable and washable for maximum ventilation - Adjustable, cam-lock strap dividers allow customization for different head shapes and riding styles - CPSC 1203*, CE EN1078*, *Varies by regional standards

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs’ MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS® system and an industry-first dual-density EPP + EPS liner that protects against both high and low-speed impacts; this is a helmet that doesn’t take your safety lightly. Add in an adjustable strap and X-Static® Pure Silver comfort liner and the comfort is every bit on par with the protection. - MIPS (Multi-directional Impact Protection System) - Patent pending, industry-first dual density EPP = EPS impact liner - Innovative break-away visor screws help reduce the likelihood snagging during a crash - Low-profile, semi-adjustable strap dividers - X-Static® Pure Silver comfort liner

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs’ MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS® system and an industry-first dual-density EPP + EPS liner that protects against both high and low-speed impacts; this is a helmet that doesn’t take your safety lightly. Add in an adjustable strap and X-Static® Pure Silver comfort liner and the comfort is every bit on par with the protection. - MIPS (Multi-directional Impact Protection System) - Patent pending, industry-first dual density EPP = EPS impact liner - Innovative break-away visor screws help reduce the likelihood snagging during a crash - Low-profile, semi-adjustable strap dividers - X-Static® Pure Silver comfort liner

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs' MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS system and an industry-first dual-density EPP + EPS liner that protects against both high- and low-speed impacts; this is a helmet that doesn't take your safety lightly. Add in an adjustable strap and X-Static Pure Silver comfort liner, and the comfort is every bit on par with the protection. Specifications - Huge air intakes - 25% larger than A1 - connected to massive exhaust ports through deep internal channels provide powerful cooling efficiency - MIPS brain protection system reduces rotational forces to the brain in some crash scenarios - Dual-density EPS co-molded with EPP for state-of-the-art impact energy management at low- and high-crash speeds, as well as everything in between - Rear stabilizer fit system with flexible, slimline arms has 3-position front and rear locations for a custom fit - Adjustable strap dividers for a perfect fit every time - 350 grams (size M/L) - CPSC 1203, CE EN 1078, AS NZ 2063:2008

- Waterproof - Reflective Elements - Mount for clip on light - Spacers for handlebar spacing - 9 Liters 700x315mm - 2.4 gallon 27.6x12.4in

It is widely regarded that increased visibility equates to increased safety. To that end, we have taken our classy all-rounder, the Formula, and incorporated a bright, 20-lumen rear LED into the fit system. It’s unobtrusive, highly visible, easily rechargeable with an included micro USB, and it just might make the difference between being seen and not. Specs - MIPS (Multi-directional Impact Protection System) - a leading slip-plane technology designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - Lithium battery packaged: In product - Number of batteries: 1 - Batteries included - Chemical composition: Stainless steel lithium - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Lithium battery energy content watt hours: 0.576wh - Battery type: Lithium ion - Number of vents: 19 - Interior/liner type: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear - Fit system: Float Fit LED - a lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS) - Weight 285 grams (size M) - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm

With a key-secured but east to remove MIK mounting that locks to the rack as well as water-repellent fabric, an included rain cover and deep, easy to access main and side pockets, the Transit MIK Trunk Bag is perfect for urban commuting and light touring - Key secured quick-release MIK system attaches and removes with ease - Durable fabric with water-repellent coating - Deep, roll top storage - Built in laptop sleeve, water bottle and E-bike battery holder

Specifically designed for bikepacking, the H2Pro Saddle Bag offers enough space to conveniently bring all the essentials for your adventure without a rear rack. Constructed from lightweight and waterproof 210D Nylon with a PTU coating, the H2Pro Saddle Bag features roll closures and an air bleed valve to make packing and repacking easy and convenient. With two light attachments and reflective strips to increase visibility while riding, the H2Pro Saddle Bag is the perfect choice for exploring on or off road. FEATURES - Air bleed valve to assist with compression and packing - Roll closures provide flexible capacity - Removable dry bag - Included bungee cord helps provide extra storage - Two light attachments and a reflective design for added safety SPECIFICATIONS - Material: Light 210D Nylon with PTU coating - Colors: Black - Size: 35 x 15 x 20cm (M), 44 x 20 x 20cm (L) - Volume: 10L (M), 17L (L)

Loosely based upon the leather "hairnets" that cyclists used to wear before protection was a priority, we took their ventilation and classic style and incorporated them into a modern helmet design that combines aerodynamics, weight, aesthetics, and ventilation—the Airnet with MIPS. - Ultra-light Mindset micro-dial fit system with height adjustability for the perfect fit. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports. - Composite matrix internal reinforcement allows larger vents for enhanced cooling. - drirelease Merino wool pads for increased comfort and sweat/ temperature management. - Vent grippers integrated at the front and rear for secure eyewear storage. - Thin, soft, and lightweight 4X DryLite webbing won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Reflective decals for increased visibility in low-light conditions. - MIPS-equipped.

Enduro ready. Created for enduro stage wins and all-day adventures. Where it thrives: Challenging trails, in competition What it's built for: Durability, comfort Highlights: - 13 air vents - Deep rear coverage - Adjustable angle visor

Proven MIPS Coverage for Superior Open-Face Performance The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS liner, goggle compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face helmet. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready trail helmets in the market today. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360 Fit System allows you to dial in your perfect fit every ride - Weight: 360g Sizing - Small = 51 – 55cm - Medium = 55 – 59cm - Large = 59 – 63cm Certifications - CPSC - EN 1078 - AS/NZS 2063

The Syntax MIPS combines a touch of European flair with slightly deeper coverage and high-performance features—all tucked into a very slim design. The outer shell is molded from a tough polycarbonate that’s fused permanently to the EPS foam liner using Giro's In-Mold construction process to enhance durability and ventilation without excess bulk. The fit is luxurious and secure, thanks to the highly adjustable Roc Loc 5 Air MIPS system that allows you to customize fit/feel for great stability and long-range comfort. Another benefit is integrated MIPS which can provide an added measure of protection from rotational forces in the event of an angled impact. MIPS - Integrated MIPS (multi-directional impact protection system)—allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact CONSTRUCTION - In-mold construction - Four-piece polycarbonate interlocking hardbody shell - Full hardbody wrap SHELL TYPE - Polycarbonate shell SPORT - Cycling NUMBER OF VENTS - 25 INTERIOR/LINER TYPE - Coolfit anti-microbial padding VENTILATION TYPE - Wind tunnel vents with internal channeling GENDER - Unisex FIT SYSTEM - Roc Loc 5 Air IMPS MIPS IMPACT LINER TYPE - EPS CERTIFICATION - US CPSC bicycle for ages 5+ - EU: CE EN 1078

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT