Write a Review

Giro's Revel is a comfortable, all-around helmet that's ready for any adventure. In-Mold construction means it's light—so light you might even forget you're wearing it. And, the Acu-Dial retention system offers an easy-to-adjust custom fit. 22 large vents allow air to flow through the helmet as you ride, keeping you cool and comfortable. It also sports a removable visor to keep the sun out of your eyes when you're heading down the road.

Created for athletes whose focus is on hydration, GU Hydration Drink Mix is formulated with a blend of electrolytes and carbohydrates, providing a light-tasting and rapidly absorbing hydration drink. Sodium, the primary electrolyte lost in sweat, aids hydration by maintaining water balance. This 70-calorie serving of GU Hydration Drink Mix contains carbohydrates (maltodextrin and fructose) that use non-competing pathways to help maximize carbohydrate absorption and utilization while diminishing stomach distress. Also Known as GU Brew.

Replacement SKS Rubber Straps for RacebladePro and S-Board

Features: - Up to 20 lumens ANSI standard approved - Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs. - Li-Po rechargeable battery - Low power indicator - Motion sensor include - IPX4 waterproof rating - Charge via Micro USB cable

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Liv Tire Levers

Turn your bike into an errand-running, cargo-hauling machine with Sunlite's Standard Lift-Off Basket. This sturdy basket attaches to your bike in a snap via handlebar mounts. It carries all your day's booty and the rubber-coated carry handle lets you bring your basket along when you're off the bike! - Dimensions: 13.5 x 10 x 9.5 inches

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.

Designed with the speed of pro riders in mind, the Bluegrass Rogue Core MIPS is sharp, bold, and alternative. It's designed to properly protect the most sensitive head areas, the back, and the temples. - The Rogue Core Mips exceeds worldwide certifications and performs best at both linear and rotational impact thanks to its meticulously engineered EPS shell and the MIPS-C2® brain protection system attached inside the helmet - The visor is designed to enhance safety and protect from branches - In the event of a crash, the visor will adapt to the shell of the helmet to help withstand extra rotational forces transferred to the neck - The Safe-T Heta retention system provides an exceptional fit and keeps the helmet stable on the head - The 360° head belt ensures that there are no pressure points on the skull, while vertical adjustments provide a custom fit - The edge at the back of the helmet is designed to properly keep the goggle strap in place - Sunglasses can be securely docked into the two visor vents - The straps anchors are embedded into the EPS and you can quickly fasten them thanks to the Fidlock® magnetic buckle, even while wearing gloves

The Cascadia ALX Fender Hardware Kits are compatible with Cascadia ALX fenders. Includes: - Rear fender metal clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Cascadia ALX Fenders: - 35mm Width: 700c x 35mm - 43mm Width: 700c x 43mm - 50mm Width: 700c x 50mm, 650B x 50mm, 26-inch x 50mm, 20-inch x 50mm - 60mm Width: 26-inch x 60mm, 650B x 60mm - 65mm Width: 29-inch x 65mm

- Classic design with anti-friction, flare groove rollers for precision cuts - Replaceable, hardened alloy-steel cutting wheel - Hardened steel retractable/lockable deburring blade - Works on 3mm-30mm tubing diameters

The Right Combo for Proper Security This lock is easy to use, equipped with two-component molded digit tumblers that ensure the digits are permanently visible. The complete plastic coating of the lock body and the distinctive textile tube of the chain prevent damage to the bike. - 8mm chain with fabric sleeve to prevent damage to the bicycle's paint - The chain is made of specially hardened steel - Two-component number tumblers guarantee long-term readability of the digits - Individually configurable code

Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

A3 Helmet w/MIPS So comfortable you won't ever want to take it off. The A3 mountain bike helmet is a new standard in premium mountain bike helmets with luxurious comfort, patent-pending innovations in safety, ventilation that will you keep you cool on the longest climbs with comfort and coverage to protect on the sketchiest of descents. Highest possible score (5-STAR) from Virginia Tech helmet safety lab so you can feel confident in all conditions. Specifications - Co-molded EPP and EPS for low and high-speed Patent Pending impact energy management. - B-Series MIPS Rotational Brain Protection system creates an optimal 360 degree fit that can maximize the safety features built into the A3. - Advanced layering 3-piece shell - 3-Way Magnajust visor easily accommodates goggles whether they are stowed on the upswing or on your face. - TLD Sweat Glide System – EVA wicking foam behind the comfort liner along the front brow directs sweat away from the eyes and optics. Includes 2 spares. - 2-piece Ionic comfort liner for anti-microbial & sweat wicking properties that is also quick to dry - 16 vents optimally tuned with the channeling of the helmet to create the most intake and exhaust of any half shell helmet we've produced - Premium 3D Fidlock magnetic buckle system and composite smart shear screws are made to shear away during severe impact/direct hit to visor. - Includes helmet carrying bag, (2) spare sweat glide strips and a spare Ionic comfort liner and sticker kit - Certification - CPSC 1203, CE EN 1078, AS NZ 2063:2008.

Get out, be seen. Sporty meets urban, a modern shape with ample air-vents is paired with the added safety of a rear light and reflective elements for visibility. Where it thrives: Leisurely rides, the open road What it's built for: Comfort, durability Highlights: - Rear safety light / reflective logos and straps - 19 air vents with front vent netting - One-handed adjustment for easy fitting

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs' MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS system and an industry-first dual-density EPP + EPS liner that protects against both high- and low-speed impacts; this is a helmet that doesn't take your safety lightly. Add in an adjustable strap and X-Static Pure Silver comfort liner, and the comfort is every bit on par with the protection. Specifications - Huge air intakes - 25% larger than A1 - connected to massive exhaust ports through deep internal channels provide powerful cooling efficiency - MIPS brain protection system reduces rotational forces to the brain in some crash scenarios - Dual-density EPS co-molded with EPP for state-of-the-art impact energy management at low- and high-crash speeds, as well as everything in between - Rear stabilizer fit system with flexible, slimline arms has 3-position front and rear locations for a custom fit - Adjustable strap dividers for a perfect fit every time - 350 grams (size M/L) - CPSC 1203, CE EN 1078, AS NZ 2063:2008

The Radix MIPS helmet combines rugged style and durability to meet the demands of core trail riders, with the coverage, lightweight, and ventilation riders need to ride comfortably and confidently, all day. The Radix MIPS helmet is for the rugged adventurer who appreciates a perfect fit, the sun staying out of their eyes, and plenty of ventilation. The highly adjustable Roc Loc 5.5 MIPS system allows you to customize fit and feel for enhanced stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The P.O.V. Visor offers 15 degrees of adjustment, and the tough polycarbonate outer shell is fused permanently to the EPS foam liner using our in-mold construction process, to enhance durability and ventilation without excess bulk. - Construction: Full-wrap in-mold polycarbonate shell with EPS liner - Sport: Cycling - Number of vents: 25 - Ventilation type: Wind tunnel vents with internal channeling - Fit system: Roc Loc 5.5 MIPS

Sunlite's Alloy Springer Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, fits most bikes, and has a capacity of up to 50 pounds. And the spring-loaded bar helps hold your stuff securely.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3 position adjustable visor - 360°Fit System allows you to dial in your perfect fit every ride

It is widely regarded that increased visibility equates to increased safety. To that end, we have taken our classy all-rounder, the Formula, and incorporated a bright, 20-lumen rear LED into the fit system. It’s unobtrusive, highly visible, easily rechargeable with an included micro USB, and it just might make the difference between being seen and not. Specs - MIPS (Multi-directional Impact Protection System) - a leading slip-plane technology designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - Lithium battery packaged: In product - Number of batteries: 1 - Batteries included - Chemical composition: Stainless steel lithium - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Lithium battery energy content watt hours: 0.576wh - Battery type: Lithium ion - Number of vents: 19 - Interior/liner type: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear - Fit system: Float Fit LED - a lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS) - Weight 285 grams (size M) - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

- Detects when you are braking to emit a bright light alerting others you're stopping - Max 150 lumens / 57 hour runtime in Flash mode - New 800 mAh battery. Larger battery, longer runtimes - New mounting style to fit shorter seat posts with USB plug and cable - Wide-angle optics with 270 visibility for maximum safety - Aero seat post compatible - Lightweight and durable - IPX7 water resistant co-molded design

Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 45 grams - Lifetime warranty

- This high performance Luxury Chamois Cream - Anti Bacterial - Kills 99% of germs - Extreme Skin Lubricant naturally reduces the friction of your skin - Free from Parabens and formaldehyde - Enriched with natural Aloe Vera, Witch Hazel, Shea Butter and Sunflower Oil - Contains Provitamins - Has a mild cooling function

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. - Compatible with most standard vernier, dial, and digital caliper designs

Perform at your highest potential with GU Energy Gel. The 3:1 ratio of maltodextrin and fructose spares your limited glycogen stores with a combination of slow and fast-absorbing carbohydrates. The electrolytes sodium and potassium are just what your legs crave to stay firing properly. Branched-chain amino acids speed recovery and reduce muscle damage, and of course the delicious flavors go down easy.

Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm

OF Invader meets all of the needs of the modern trail rider. If you occasionally find yourself in over your head, no pun intended, on your regular trail rides, the Open Face Invader is here to give you the extra bit of confidence and security you're looking for. The OF Invader is built using Composite Fusion, a process that fuses the helmet shell and foam enabling us to use a thinner shell, creating a lighter stronger helmet and includes a RHEON Low Density Layer for protection from non-linear and rotational impacts. “Our bikes are better, our trails are bigger and our protection needs to keep up” said Brad. “The new OF Invader is designed with deeper coverage and better ventilation than a standard half shell helmet, so riders are ready for whatever the trail offers.” The OF Invader comes standard with 3 different sized cheek pads to allow you to customize your fit, an adjustable visor, FidLock magnetic buckle and our Frequency Fit System with vertical adjustment. - Composite Fusion - RHEON Low Density Layer - Adjustable Visor - Three Pad Options for Your Perfect Fit - FidLock Magnetic Buckle - Frequency Fit System with Vertical Adjust - WEIGHT: 640 g / 22.5 oz - CERTIFICATION: CPSC, EN 1078 (This helmet is NOT ASTM rated for Downhill riding)