Racks

- Adjustable width fits 26, 27.5, or 29 inch frames with 1" to 4" tires - Modular design allows use with a variety of Plus and Fat bikes from 135 - 170mm OLD - Adjustable for 26", 27.5" and 29er wheels - Tubular 6061-T6 alloy construction - Adjustable to fit 1" to 4" width tires - Disc brake compatible

Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.

The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty

The sturdy Lowrider by Tubus – now also in stainless steel! Highly durable, resistant to rust and can be positioned flexibly. An indestructible, uncomplicated travel companion in an elegant style! - Stainless steel version - Elegant style thanks to polished surface - Indestructible - Matches the appearance of the bike beautifully - Approved for 18 kg | 39.7 lbs - With lamp holder - Size: 26"/28" - Weight: 500g/17.6-ounce - Diameter: 14/10mm | 0.6/0.4-ounce

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

Liviano - one of the noblest forms of transporting luggage. Actually, we don't have to say anything more about the Liviano apart from the keywords "titanium", "second loading level" and "comfortable luggage surface". Frequently asked for and eagerly awaited, the tubus range now has a design masterpiece that makes absolutely no compromise between extremely low dead weight and convincing load capacity and stability, including the option of mounting a rear light. Cyclists couldn't be better prepared for the upcoming tour!

Whether you're kitting out your ride to be a full-on grocery-getter or just trying to get that sweaty backpack off your back, this adjustable rack gives you a whole new home for all of your haul-ables! - Aluminum - Carries up to 20 lbs - Easily add a crate! - Fits on all Pure Fix and Pure City bikes EXCEPT Premium Series, Urban Commuter, and Keirin Track Completes

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Sunlite's Rack for Deluxe Child Carrier supports the Deluxe Child Carrier (sold separately). It fits 700C-wheeled bicycles.

- Full chromoly construction specifically designed for 700c bicycles - Mounts to hub axle for universal fitment - Adjustable height with lower horizontal strut for fitment of a small bag or pannier - Deck provides ample cargo space at 14.25"X12" - Optional stylish fence available separately

- Full chromoly construction specifically designed for 700c bicycles - Mounts to hub axle for universal fitment -Adjustable height with lower horizontal strut for fitment of a small bag or pannier - Deck provides ample cargo space at 14.25"X12" - Optional stylish fence available separately

Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.

Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

Rack 'em up! - Add carrying capacity while looking stylish. - Perfect for hauling your favorite belongings. Product details - Compatible with MIK accessories - Alloy heavy-duty 12mm diameter bars - Carrying capacity up to 25kg or 55lbs. - Stainless steel hardware included - Rear rack designed to be compatible with Electra Vale models

Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.

- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability

Minoura's KCL-3F Pouteur is made from welded steel tubing and mounts to the front of the bicycles. It has an extra large surface area. - Fits 26 to 700c wheels - 11.4 x 16.9 - Max load of 40 lbs. - Durable black powder coat finish - Made of strong steel tubing

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Add more utility to your Electra Townie with the Townie Alloy Rack. This aluminum rear rack features a sturdy design that attaches quickly and easily so you can bring along nearly anything your heart desires. The platform acts as a short fender, too.

Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

- Front basket rack with integrated U-lock holder - Cargo net holds basket contents securely in place - Mounts to caliper hole and front axle - Adjustable fit for 26", 27.5", 29", and 700c - Heavy-duty AL6061-T6 alloy construction supports up to 55lbs - Platform area measures 12" x 14"

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

- Classic constructeur style racks made of polished stainless steel - Mounts to hub axle or braze-ons for universal fitment. - Front mini-Rack mounts to mid-blade fork eyelets, or uses included p-clamps - Front racks have lots of braze-ons for mounting accessories/Lights - Maximum height is 40cm (Does not apply to mini rack) - Includes mounting hardware

- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg

What does the HD stand for? Heavy Duty. Sunlite's Gold Tec HD Rack is made for the hardcore commuters and tourers out there that load up and ride more than most people drive. Made from lightweight tubular aluminum, the HD Rack is durable enough for daily commutes, tough enough for cross-country trips and doesn't weight you down. The top deck has a capacity of up to 55 pounds and side struts support fully loaded panniers. Plus, it fits both road and mountain bikes.

Sunlite's Gold Tec Disc Rack fits almost any disc brake-equipped bike with wheel sizes of 26-inch, 27-inch, and 700c. Made from lightweight tubular aluminum, the Disc Rack is durable enough for daily commutes and light enough for long tours. The top deck has a capacity of up to 50 pounds and side struts support rear panniers.

You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case. - Strong steel tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 1360 g (3 lbs) - Rated to 35 kgs (77 lbs)

You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)