Wheels

Replacement clear plastic spoke guard.

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

- STW ST1 26.5mm wide alloy rims - Chrome plate steel 3/8" flatted axle. Compatible with 5/16" forks - Alloy wheels use 14G UCP spokes with 5/8" brass nipples

Rims: WTB ST i23, inner width: 23 mm - TCS 2.0 Tubeless system - Solid Strip (incl.) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes Front hub: - Shimano HB-MT200, M9x100mm - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Rear hub (-02): - Shimano FH-MT200-B, M9x141mm - HG Freehub compatible with MTB 8-11spd - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Rear hub (-03): - Shimano FH-M4050, M9x135 - HG Freehub compatible with MTB 8-11spd - Center Lock disc mount - Adjust. bearings - Quick Release binder incl. Tubeless Compatible (Valve and Tape not included)Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples

Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

- Alex MD21 double wall 26'', disc specific rim, Black - Formula DC-20/DC-22 hubs - For All-Mountain and Cross-Country - Tubeless Ready - Inner rim width: 21mm - Outer rim width: 26mm - Rim height: 18 mm - Rim weight: 450 g - With eyelets - Schrader Valve - 32 holes - Sapim Leader Stainless spokes—Black

- STW ST1 26.5mm wide alloy rims - KT QR ATB 9mm/100/108 axle - Black or Silver UCP spokes

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

The Boost 6-Bolt front is specifically for "Boost" disc spacing forks with 110x15mm "Boost" axles. Using the larger diameter hubshell bearing the Boost 6-Bolt is designed to tackle rough terrain and aggressive riding such as downhill and enduro. In an evolving landscape of axle specifications, we are confident that the "Boost" disc location is here to stay. Chris King Boost 6-Bolt front hubs are designed as precision mountain tools. We use one-piece axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra low drag. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Wide flange placement - Fits 110x15mm Boost axles - Legendary made-in-house LD bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our Universal Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Available in 28, and 32 hole spoke count

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Come in 28h and 32h drilling - Available with Micro Spline, HG or XD driveshell. - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our ISO Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Sun Duroc 40 Disc blk 32h - -01: STW Turbo Boost 6-Bolt disc - -02: STW Turbo Boost Shimano 6-Bolt disc

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made from start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles, and endcaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing, and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every 0.52 degrees, yielding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools—designed to keep you in the saddle and out of the service queue

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-M475 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Replacement freehub kit for Hydra hubs

• 5-sided key locking skewer set • Chromoly axles • 6061 anodized aluminum • Includes seat and F+R wheel skewers • 95g (set)

- Converts Schrader rims to Presta - Rubber - Sold individually

Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.

Sealed cartridge bearing High flange design w/cut outs 100mm OLD Lightweight, hollow, heat-treated axle Black, silver, or white 32 or 36-hole spoke drilling

- Eady to install - Spoke mounted - 2 per set

- Grade 3 balls and magnetite rust proof finish - Abec 5 precision and silicone w seals - 3 times cryogenic race treatment - Bearings sold individually, not as pair

Rims: Mavic XM119 Disc 26" (Black) - ETRTO 559-19 - External width: 24mm - Inner width: 19mm - Profile height: 20.5mm - Disc Brake Only - For Schrader or Presta valve (Adapter included) - 32 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included

Knurled aluminum body for better grip. = CNC Machined from 6061 T6 aluminum

Freehub bodies for Zipp Cognition hubs.

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminants - Thru axle design with 8-10 speed cassette and XD drivetrain options - Brake Type: 6B

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

On today's road forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic road hubs to use 15mm axles - One pair required for each hub to be converted

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.

Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!

Origin-8's Track Attack 42mm Fixie Wheelset comes in a rainbow of colors, from the subdued to the bold, so you'll know your ride is the sharpest on the block. But, they're not just a pretty face. They feature 42mm deep aluminum rims, sealed cartridge bearings and reliable DT Swiss spokes to roll strong and sure over less-than-ideal surfaces. And, they come with a flip-flop rear hub so you can choose between fixed and freewheeling!

Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.

SRAM's Quick Releases hold your wheel tightly in place, are built for ease of use and made to last, too. You get a front and rear quick release.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

- Axle/Spacing: 10/14 x 135mm nutted - International Standard 6-bolt disc rotor mount - 11 tooth (1/8") steel cog is pre-installed, ideal for compact drivetrain setup - Tough, instant pickup 120 point triple wedge pawl system with a bushed mini threaded driver for Singlespeed and Dirt Jump - Bushed driver is more durable than cartridge bearings - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame), 14mm adapters included

- Produced by one of Japan's oldest hub makers - Silky smooth Japanese sealed cartridge bearings - High polished finish - Choose fixed/free or fixed/fixed flip-flop rear hub - Hub spacing: 120mm OLD

- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm (See MT-3100) or 20mm thru-axle - 32 or 36-hole spoke drilling

- Carbon rims available in two different profile heights featuring improved brake tracks - Toray T700 carbon in both Unidirectional and 3k carbon weaves for strength and integrity - Tubeless compatible rim bed with an 18mm internal width supports wider modern road tires Specs: - ISO: 622 - Width ID: 18 - Width OD: 25 - Wall: Dbl - Side: MSW - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 50 - Weight: 500g - ERD: 545 Low Profile: - Profile: 38 - Weight: 470g - ERD: 569

- End caps for Origin8 FB-1100 fat bike hubs

- Elite Series convertible fat bike hubs - Available in multiple axle configurations - J-bend spoke compatible - 6 bolt disc brake rotor compatible - Sealed bearings - Bearing: Sealed - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 27.65mm Quick Release: - Weight: 246g - LTF-R: 24.85mm - CTF-L: 39.85mm - CTF-R: 42.65mm 15mm Thru-Axle: - Weight: 256g - LTF-R: 27.65mm - CTF-L: 47.35mm - CTF-R: 47.35mm

- Elite Series convertible fat bike hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - J-bend spoke compatible - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm Quick-Release: - LTF-L: 48.65mm - LTF-R: 48.65mm - CTF-L: 36.5mm - CTF-R: 36.5mm 12mm Thru-Axle: - LTF-L: 52.15mm - LTF-R: 52.15mm - CTF-L: 46.5mm - CTF-R: 46.5mm

- Aluminum hubs - Loose ball - Bolt-on - Axle: B/O 3/8 - Material: Aly - Color: Blk - Brake Type: 6B - OLD: 135mm

- Replacement axle sets for MT-1100 hubs - Axle: QR

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Wt: 180g J-Bend: - PCD-L: 58mm - PCD-R: 45mm - LTF-L: 27.65mm - LTF-R: 15.35mm - CTF-L: 22.35mm - CTF-R: 34.65mm Straight Pull: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 31.4mm - LTF-R: 19.6mm - CTF-L: 18.6mm - CTF-R: 30.4mm

- End caps for Origin8 MT-2100 hubs

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminants - 20mm Thru Axle with 15mm option, 6 bolt disc compatible

- 6 pawl/48 point/7.5-degree engagement - Cassette bodies for Elite Series RD-1110 hubs - Sealed bearings - Material: AL7075

- Axle adapters for RD-1110 Elite Series front road disc hubs - Available in standard QR, 12mm, and 15mm thru-axle options

- Axle adapters for RD-1110 Elite Series rear road disc hubs - Available in standard QR and 12mm thru-axle options - Axles included with adapters

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/6-Bolt Disc: PCD-L: 36mm PCD-R: 36mm LTF-L: 27.75mm LTF-R: 15.25mm CTF-L: 22.25mm CTF-R: 34.75mm J-Bend Spoke/Centerlock Disc: PCD-L: 45mm PCD-R: 45mm LTF-L: 27.25mm LTF-R: 15.45mm CTF-L: 22.75mm CTF-R: 34.55mm

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/QR Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 32.75mm LTF-R: 50.05mm CTF-L: 34.9mm CTF-R: 17.6mm Straight Pull Spoke/12mm Thru-Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 36.25mm LTF-R: 53.55mm CTF-L: 34.9mm CTF-R: 17.6mm J-Bend Spoke/QR Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 32.65mm LTF-R: 48.2mm CTF-L: 35mm CTF-R: 19.45mm J-Bend Spoke/12mm Thru-Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 36.15mm LTF-R: 51.7mm CTF-L: 35mm CTF-R: 19.45mm