BB30 Spacer - 15.46mm
$6.00 - $28.00
Flat Mount Disc Caliper Bracket Bolts
Customize your ride with SRAM bar end plugs.
TT Brake Lever Hardware Kit
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2
X01 Eagle Cable Anchor Kit
- Chainring bolts for Rival D1 2x cranks
M15/M26 Alloy GXP Crank Arm Bolt Kit
Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
- GX Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5
Red eTap battery terminal cover
GXP Shield and Wave Washer
- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
$17.99 - $23.99
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
$17.99 - $19.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4
Replacement parts for Zipp aerobars. Compatible With: - HB-VKAL-BS1-A1, HB-VKAL-BS1-A2, HB-VKAL-CLIP-A1, HB-VKAL-CLIP-B1, HB-VKAL-EXT-A1, HB-VKAL-EXT-A2
Trigger Clamp/Bolt Kit For X0 X9 X7
- GX DH/X01DH 7 Speed Rear Derailleur B-Bolt and Limit Screw Kit Hex5
- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
SRAM Caliper Brake Adjusting Barrel with Nut and Cable Fixing Assembly.
$21.99 - $23.99
Disc Brake Adaptors - Includes Stainless Bolts
- SRAM, Road pulleys, 11.7515.060.000
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit
The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.
The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace
- Replacement Stealth Ring elastomer set for XG-1090 X-Dome cassette - Fits 11-23
SRAM BB30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a BB30 frame; 68mm shells only - Install with headset press and green Loctite
- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5
- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1
Replacement parts for Zipp aerobars. Compatible With: - HB-VK-STLH-A1
Replacement extension tower for Zipp aerobars. Compatible With: - HB-VK-STLH-A1
GX Eagle Rear Derailleur Pulley Kit
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.
$39.99 - $40.00
Replacement hoods for SRAM hydraulic shifter/brake levers.
Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1
- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1
Cable Anchor/Limit Screw
- Includes: 2-16mm &2-14mm Aluminum Caliper pistons, Seals & O-rings—Guide Ultimate
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
- Titanium rotor bolts - T25 bolt head
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC
- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free
Page 1 of 2 Next page