Parts & Accessories

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum

- Sunlite Cottered Pins

• ISIS interface • Only includes left crank • 175mm length

• Adjustable aluminum chain guard • Fits front chainrings from 38T to 48T • Multiple clamp options fit seat tubes from 25.4 to 34.9mm • Black anodized finish

For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs

RaceFace CINCH Spindle - Fits 150/157mm Hub Spacing

The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr

Replacement crank arm for GX Eagle GXP

RaceFace Crank Arm Fixing Bolts - M15

SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with Shimano cranksets that have a removable spider

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.

These spiders are optimized to fit Cane Creek's eeWings All-Road cranks, adding more versatility for riders. The spiders will allow direct-mount cranks, such as the eeWings, to accommodate 110 BCD chainring so riders can expand their gearing options. - Allows riders to run more 1x chainring options - CNC high grade 7075 series aluminum with black anodized finish - 50g

- Crank Construction : HOLLOWTECH II - Optimum power transfer

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with the Race Face Cinch cranksets that have a removable spider

Forged AL6061-T6 alloy spiders for Origin8 Thruster Series modular cranksets - SRAM 3-bolt interface for crank arm mounting - Available in both single and double chainring configurations for MTB, Boost/Fat, and Road/Cross/Gravel applications - BCD: 104mm 4-Bolt - Type: 1x

- Series: SLX - Crank Construction: HOLLOWTECH II Technology

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting

RaceFace CINCH Crank Bolt and Puller Cap Sets.

- Crank dust cap - Works with most three-piece crank models

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- Crank Arm Length: 175mm - Interface: ISIS - Position: Left

- Horizontal square interface - Only includes left crank

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Race Face CINCH Spindle

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

- Lower slider replacement parts for E-13 chainguides

Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included

Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.

- SO-2995: hex-type steel crank fixing bolt set with integrated plastic dust cap

- Universal bottom bracket style mount - 44T maximum chainring size - Impact-resistant plastic - Size: Universal - Application: BB Mount

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0