Bottom Brackets

The PF30 standard has opened design possibilities for mountain bikes. Our CeramicSpeed PF30 Shimano MTB Bottom Bracket gives you the ability to install Shimano and other 24mm diameter spindle cranks on your PF30 MTB. Our PF30 cups have extended sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system. There is both a Standard and Coated version. Both feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional benefit: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life. The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer. If you want longer life and even lower drag, opt for the CeramicSpeed Coated Bearings. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings. Performance can be tuned by changing the grease. LongLife Grease comes installed, but can be changed for lower-drag All Round Grease for lower drag and cleaner riding conditions. In The Box - 1 bottom bracket with CeramicSpeed bearings installed - 2 dust covers - 5 0.85mm spacers - 10ml syringe of LongLife Grease - Sticker sheet

BSA is equivalent to English threading. English threading on road bikes mean a 68mm-wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. English threading is easy to work with, and 24mm spindles easily fit through the shell, allowing for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet

Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter. This kit has all the pieces necessary to install 24mm diameter cranks, such as those from Shimano, FSA, and others into an ITA shell. CeramicSpeed bearings are pressed into threaded cups, then those cups are threaded into the frame. You choose whether you want yours equipped with Standard or Coated Bearings. Super-round, super-smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag. ITA BBs, thanks to the popularity of Italian road bike design, still have a following. The drive-side cup needs to be properly secured, but once that's done, the system is excellent. 24mm cranks work better when mated to our bearings. To make your bike as efficient as possible, you must reduce mechanical drag. Bottom brackets have a measurable effect on speed. CeramicSpeed balls are 100% smoother and 15% harder than the ceramic competition. They run on smoother races, too. That means our Standard Bearing BBs have 75% less drag compared to typical bottom brackets. And, the bearings last at least 3x longer than other bearings. These bearings come packed with All Round Grease. If you want less drag and are riding in cleaner environs, install lowest drag TT and Track Grease. If you're riding in wet conditions, more durable LongLife Grease can be put in. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of All Round grease - Sticker sheet

Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #4 is designed to mate the ThreadFit 24 bottom bracket with a 24mm spindle - Spindle Interface Type: Shimano Hollowtech II - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #6 is designed to mate the ThreadFit 24 bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #1 is designed to mate the ThreadFit 30 bottom bracket with a DUB MTB 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #2 is designed to mate the ThreadFit 30 bottom bracket with a DUB road 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #3 is designed to mate the ThreadFit30 bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

The Chris King ThreadFit T47 24i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24i fits 86mm and 92mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24i bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 86 , 92 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 24x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24x will fit 68mm and 73mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24x bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 30i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 30i will fit 68mm, 73mm, 83mm, 86mm, and 92mm shell widths with 30mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #5 is designed to mate the ThreadFit T47 30i bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , Rotor 3D+ , e*Thirteen P3 Connect , Zipp Vuma - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 30x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 30x fits 68mm and 73mm shell widths with 30mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #5 is designed to mate the ThreadFit T47 30x bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The Chris King ThreadFit T47 30x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 30x fits 68mm and 73mm shell widths with 30mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #5 is designed to mate the ThreadFit T47 30x bottom bracket with a 30mm spindle - Spindle Interface Type: RaceFace/Easton CINCH , 386 EVO , e*Thirteen P3 Connect , Rotor 3D+ , Zipp Vuma - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi

Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you're running the best crankset on the market, you should have the performance BB to match. - Thinner and lower viscosity bearing grease for higher durability at high speeds - In-house testing procedure includes developing a 24-hour continuous water invasion test - Offered in a variety of types for better compatibility - 386 EVO 46mm Press fit, 30mm Spindle, 103gm, 86.5mm

Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you’re running the best crankset on the market, you should have the performance BB to match. - Thinner and lower viscosity bearing grease for higher durability at high speeds - In-house testing procedure includes developing a 24-hour continuous water invasion test - BB86 41mm Press fit, 30mm Spindle, 66gm, 86.5mm

Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g

MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA

- Enables the use of a MegaExo (24mm spindle) crankset on a BB90 (Trek Madone) frame - Choose MegaExo carbon (ceramic bearings with red-anodized aluminum shields) or alloy (stainless steel bearings with black plastic shields)

The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles. - Die cast and CNC-machined alloy bearing cups - 19mm I.D. - BB86/92 compatible - BB Shell Width (mm): 92 - Bottom Bracket Shell I.D.: 41

This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame. - Intended for road use - Steel bearings

- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086) - Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II - BB Shell Width (mm): 79 – 84.5 - Bottom Bracket Shell I.D.: 46 - BB/Frame Interface: BBright Direct Fit

FSA MegaExo Bottom Bracket - MegaExo cranks to press fit BB89.5 and BB92 frame - Spindle Interface Type: FSA MegaExo - BB Shell Width (mm): 89.5 – 92 - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB89.5, BB92

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

There's precious little that's better than a fresh bottom bracket. This complete FSA BB30 Bottom Bracket contains 2 stainless steel bearings, 2 C-Clips, 2 dust covers, and 1 adjustment washer.

Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92

Bottom brackets from FSA for non-threaded applications. - Spindle Interface Type: FSA MegaExo 19 - BB Shell Width (mm): 86 - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86

- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options