Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

$459.00
BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor, to fit in the tight space of this 34mm spindle. Choose between two bearings types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our CeramicSpeed Balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Note that the threaded extensions of this BB's cups that thread into the frame are thin, as they need to fit a 30mm spindle inside the cups. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet - Spacertube
$59.99
Pressfit Model: • For use on BB86/92 bottom bracket shells • Compatible with 24mm spindle Hollowtech II cranksets • BB Shell Width (mm): 92 mm • BB/Frame Interface: BB86 , BB92 • Bottom Bracket Shell I.D.: 41 • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II Threaded Model: • Includes 3 x 2.5mm spacers • Includes TL-FC24 adapter tool • Reduced size for light weight • New seal construction for smoother rotation • Requires TL-FC34 or included TL-FC24 adaptor for installation & removal • BB Shell Width (mm): 68 mm • BB/Frame Interface: English • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II • Weight: 77 g
$95.95
Our BB30 and PF30 bottom brackets are thread-together systems, which eliminate the creaks common in non-thread-together bottom brackets. Our BB92 bottom bracket uses industry-exclusive, dual-row bearings to fit big performance into a small BB shell, with a center tube to seal the BB shell. Custom bearings, high-performance seals, and custom grease specifications in all bottom brackets deliver supreme durability and smooth spinning. Available for cranks with either 30mm spindle (Race and Plus cranks) or 24mm spindle (Base cranks). All BBs include our 1 year, no-questions-asked guarantee. - Bottom brackets for e*thirteen XCX TRS and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit EV-8003) - 7075-T6 black anodized cups with custom angular contact bearings - One year no questions asked bearing w
$11.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$154.99
The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget. - For 11-speed drivetrains - Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length - Affordable and high-end style crankset
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$9.99
CINCH Crank Bolt with Washer
$118.65
BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 148g
$118.65
Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!
$122.59
External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g
$64.05
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
$123.99
T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM and Truvativ GXP cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer - Drive Side Bearing: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.2mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 162g
$31.99 - $37.99
A tough bottom bracket that will go as hard as you. The PowerSpline has a heat-treated chromoly 12 spline spindle to make sure it can go the distance with even the most demanding riders. SPECIFICATIONS: - BB-FRAME INTERFACE: English/BSA 68E/73mm, English/BSA 68mm, English/BSA 73mm - CHAINLINE: 46.0mm, 48.5mm, 51.0mm, n/a - SPINDLE LENGTH: 108mm Spindle, 113mm Spindle, 118mm Spindle - SUPPORT E-TYPE FD: n/a, Yes - CRANK-BB INTERFACE: Power Spline - BEARING TYPE: n/a - SPINDLE DIAMETER: n/a - CUP MATERIAL: n/a - WEIGHT (G): 363 - WEIGHT BASED ON: BSA 73mm, 113mm spindle
$114.99 - $138.00
- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth
$359.00 - $459.00
The BB30 standard opened up design possibilities for frames. Adapting it for Shimano cranks takes a special machined aluminum threaded bottom bracket that threads into itself. Ours are finished with CeramicSpeed Bearings. You have two choices in terms of bearings. The first choice is our low drag, long life standard bearing with hardened-steel races and our super-round CeramicSpeed Balls. The second choice is our coated bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. This bottom bracket works with cranks that have 24mm spindles. Bottom brackets have several variables, but within that, CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings see another big bump in performance. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. Performance can be tuned by changing the grease. All Round Grease comes installed, but can be changed for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers installed - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
$45.99
eeWings Stainless Steel fixing bolt to replace Titanium fixing bolt 14mm Tool and bolt washer included
$211.00
- Quarq D1 crank arm assembly - 8 bolt interface for use DZero DUB and DFour DUB power spiders
$134.99
The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice. - Its forged 7050 AL construction optimizes stiffness without added weight - The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options - Can run alloy or steel CINCH direct mount chainrings - Boost-compatible 24mm EXI interface spindle - Direct mount chainline: 51mm / 57.5mm (Flipped Ring) - 2X Cinch spider chainline: 49.5mm - Boost 2X Cinch spider chainline: 52.5mm - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No - Chainring Included: No
$234.99
Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T
$118.65
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g
$57.00
FSA Shimano STEPS eBike replacement crankarms.
$13.99 - $19.99
- Forged steel - 24 TPI
$33.95 - $40.45
Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit. - Designed specifically for gravel riding and racing to protect against water, mud & grit
$54.99
Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets
$4.99
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
$11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
$105.99
Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt
$145.00
The Omega crankset is where fashion meets function, combining sleek styling with robust industrial design elements. Updated 11-speed compatibility puts the latest shifting technology into an attractive, price-conscious crankset. - Die-cast aluminum crank arms are lightweight and durable - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Pedal Spindle: 9/16" - Chainline/Hub Compatibility: 130 Hubs - Rings: 50/34 - Spindle Interface Type: FSA MegaExo 19 - Chainring BCD: 120, 90 - Bottom Bracket Included: No
$44.99
- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
$153.99
- XT M8120 12 speed crankset - Fits 148mm Boost MTB frames - Greater clearance allows wider tires than FC-M8100 - Hollow forged crank maximizes power transfer while limiting weight - Direct mount chainring type (TL-FC41 tool included) - Q-factor : 178mm - Chainline : 55mm
$33.90
- High quality sealed cartridge bearings with steel cups - Traditional square JIS 2-degree taper crank-arm interface - 68/73mm English (BC1.37 x 24tpi - RH/LH). Compatible with IRD retrofit cups (sold separately), RD-419
$114.99
- 2-PIECE CRANKSET for 157 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 181 mm - Direct mount chainring - Chain Line 56.5 mm - 1x12-speed
$743.00
The SRAM RED 1 AXS crankset features exceptional 1x drivetrain design. It provides the simplicity and tighter gearing range that is well-suited for road racing and riding in flatter terrain, where a wide range would go unused. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
$263.00
- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB
$149.99
Some riders test their limits more than others. For these riders, the GX Eagle DUB crankset allows them to go all in, every day they ride. The best aluminum crankset we make, engineered to deliver consistent performance every ride. Featuring our X-SYNC 2 tooth profile chainring for complete chain control, each tooth's thickness is toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology's patented spindle design and bottom bracket provide a uniform approach to fitment, better sealing, and forward and backward compatibility. Simply put, the forged aluminum GX Eagle DUB crankset is the no-frills choice of riders who know. - Our best aluminum crankset - Direct mount interface compatible with chainrings across the entire Eagle Ecosystem - Master GX colorway as part of Eagle Colorsystem—pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper
$9.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
$24.99
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$320.00
Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminum MTB cranks. The latest FEA analysis tools, rigorous lab testing, and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested, and manufactured in Barnoldswick, UK. - 15% lighter and stiffer than the previous model - Now featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Forged and CNC machined 7075 series aluminum alloy crank arms - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 641g (arms, axle, and 34 tooth spiderless ring)
$49.99 - $199.99
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options
$124.99
The Easton EA90 aluminum crankset is optimized for gravel, cyclocross, and road riding styles. It offers the versatility of the CINCH system for a variety of gearing combinations. - EA90 alloy crank arms are lightweight and feature a matte black anodized finish - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH power meter compatible - Bottom bracket and chainrings sold separately - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Cyclocross, Gravel, Road - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No
$19.00 - $29.90
- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)
$7.99
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
$93.00
Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II
$27.95
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
$263.00
- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB92 - BB Shell Width: 89/92mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 41mm
$399.99
The Box Two M30-P crankset is a slightly less acute embodiment of our Oversized technology for cranksets. We squeeze in a show-stopping Praxis™ made 30mm that’s been cold-forged from 7075 T6 aluminum and then painstakingly ground to precision. You’ll be relieved to know this will all fit in a European bottom bracket. The crank arms and spider are poached from the Box One M35 model and as a result, you get all that hollow-forged generosity to help you put that power down. These cranks are engineered for the larger-sized racers. - Oversized Technology™ Hollow Forged Design - Oversized 30mm Alloy Spindle - Self-Extracting Crank Bolt System - 4-bolt 104 BCD Spider with Flex-Resistant Ring - External BSA 30mm BB Included - Weight: 28.6oz - Drive Side Compatibility: Right Hand Drive - Crankset Style: 2-Piece - BB Style: Euro - Chainring BCD: 104 - BB Included: Yes
$169.99
The Box Four Crankset features a 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance. Box Four Cranks feature steel pedal inserts that require pedal washers and external sealed bearing BSA bottom brackets, and both are provided in the box. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard FEATURES - Oversized Bottom Bracket Interface - Dual Pinch Bolts for Even Clamping Force - Spider with Flex-Resistant Ring COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two 24mm bottom bracket - Box Extremum RacePrep bottom bracket
$1,291.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
$263.00
The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PressFit 30 (68-73mm) Road Wide Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 68 - Defined Color: Black - BB/Frame Interface: PF30 - Weight: 120
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$410.00
True competitors are always looking for a performance advantage - a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. - Chainrings not included
$368.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires
$577.45
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
$189.99
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g
$69.99
Featuring a JIS square taper standard, our oversized bottom bracket interface showcases a step-down shape specific to the crank arm-length meeting at the pedal boss. Unlike alternative options, no two lengths are the same. Our durable cold-forged cranksets are available in sizes from 135mm through 170mm and employ a 5-bolt 110 BCD chainring pattern. All JIS square taper standard cranks are compatible with all BSA European-style square taper bottom brackets. FEATURES - Oversized Bottom Bracket Interface - Durable Cold-Forged Construction - JIS Square Taper Design COMPATIBILITY - Box One Bottom Bracket Square-Taper Titanium/Carbon - Box Two Bottom Bracket Square-Taper Chromoly - Box Three Square Taper Steel Bottom Bracket - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts
$54.02
- Forged and CNC-machined aluminum with precision sealed bearings for 2-pc cranks and 24mm spindles - BSA 1.37"x24T for 68/73mm shells
$94.45
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams
$63.95
Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams
$134.99
Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB
Page 1 of 6 Next page