Cycling Shoes

A few notes on this shoe -- This product combines our SW Vent upper with our race winning SW Recon outsole to create a one-of-a-kind shoe perfect for long hot days in the saddle. We see this product as the ultimate gravel racing product for hot summer races. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entire-new, engineered mesh upper and tongue let that air flow freely throughout the shoe—aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong-hold of your foot, ensuring pro-proven power transfer. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, it’s been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. - Two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee so you can fine-tune your level of foot-hold on-the-fly. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals.

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongue-less sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn’t stretch when pulled on, making sure that your foot stays where it’s supposed to. With all of these features combined, you can be sure that we’ve kept in line with the motto “every watt is sacred.” In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC’d alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa® S2-SV Snap Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 395.9 grams

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 395.9 grams

If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper conforms to the foot and is built to last. - Cushioned EVA foam midsole for comfort - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 367g (1/2 pair, Size 42)

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

To Slip or SlipNot™; 2FO Roost delivers grip, durability, and light-weight unmatched by any trail shoe. The SlipNot™ sole sets the standard for stickiness, traction, durability, and pedal feel. Built with a fully synthetic upper and Airmesh padding—meaning the 2FO Roost is super light-weight, comfortable, and durable, and for those times when you go full-submarine, it dries really fast. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - DURABILITY: Every detail designed for durability on the dirt, from upper to outsole to toe-kick to heel-cup, and everything in between. Offering superior support, durability, and fast drying for year-round riding. - PROTECTION: Forefoot TPU toecap offers protection from stones and roots on fast technical descents. - SUPPORT: Internal heel counter adds support without bulk. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - LACED UP: Laces and eyelets offer easily adjustable comfort and a locked-in fit - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

The Trailcross Clip-In is the latest addition to the Five Ten Trailcross family, designed from the ground up with adventure at its core. Packed with all the Trailcross technology, this latest model provides clip-in performance on the bike and all-day comfort when hiking off the bike. The addition of the Clip-In model takes the range to the next level, making our award-winning design available to clip-in pedal users for the first time. The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon

For superb stiffness and minimal weight, the SCOTT Road RC Evo is your shoe of choice. Primed for attack, it features an ultra-comfortable laminated TPU & airmesh upper. The dual-zone BOA Li2 Fit System allows on-the-fly adjustability at the ankle and the forefoot. For optimal foot support, the ErgoLogic insole features adjustable arch support and a metatarsal button. - Ultra-lightweight - Extreme stiffness index 10 - Seamless TPU upper - HMX carbon sole - Dual BOA Fit System

Get dual performance with these transitional mountain bike shoes. Designed to grip the pedals, they have a weather-resistant suede upper for soft comfort. The skate shoe design is padded for comfort, yet lightweight for all-day rides and walks around town. - Padded for comfort yet lightweight for all-day rides and walks around town - Stealth S1 rubber outsole for unbeatable grip - Suede leather upper for comfort and soft feel - One-piece molded rubber cupsole - Textile lining - Regular fit with lace closure - Weight per shoe: 350g (based on Men's Size 9)

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

Lighter. Stronger. Faster. Designed for speed and comfort, the Vaypor S once again redefines the standards of pro level road cycling shoes. Bont's latest flagship shoe has been further refined to improve on their already industry leading standards. Whether you are a pro racer or simply a rider who demands the finest, the Vaypor S will provide the most anatomically and biomechanically correct platform with the most efficient power transfer platform currently available. - 100% carbon monocoque chassis utilizing hand-laid unidirectional carbon and Bont's proprietary heat molding technology - Duralite upper & suede leather liner - 3.6mm stack height - Frontal area air vents - Innersole: EVA thermo-moldable - Sole Guards: replaceable heel guard - Padding: memory foam - Fully heat-moldable monocoque chassis - Cleat mounting: 3-hole Look configuration plus mm grid plus grip - Closure System: Dual Dial System with replaceable Kevlar Wiring - Weight: 230 grams (approximate weight based on size 42 shoe)

A true all-terrain, all-road cycling shoe designed with a more generous fit for endless comfort, from gravel tracks to MTB trails, all-day adventures to extended bikepacking escapes, for riders who know no borders. TERRA ATLAS is our versatile and reliable all-rounder, for all-terrain gravel, mountain biking and beyond. - L6 BOA Fit System - X5 nylon outsole – with rubber tread, stiffness index 5 - Weight: 355g - Sizes: 36-48 (37 to 47 also in half sizes)

Do it all - on flat pedals! The SCOTT AR (All-Rounder) is the shoe of choice for comfortable and versatile trail riding without breaking the bank. The AR shoe not only looks good, it balances moderate stiffness and the freedom of motion you need for whatever jump lies ahead. Breathable Polyurethane and a 3D airmesh upper keeps cool even on the toughest trails, and a cushioned EVA midsole and a grippy Sticki Rubber outsole make this shoe a great value for any flat pedal fan. Key Features: - Flat pedal shoe - Lace-up style - Precise fit - EVA midsole

Extremely versatile, this lace-up cycling shoe makes the easy transition from hike-a-bike sections to pedaling. A composite shank through the midsole connects directly to SPD pedal systems and provides necessary stiffness to prevent foot fatigue while pedaling. Run shoe EVA provides comfortable cushioning off the bike. - Bonded Seamless Upper delivers all-day riding comfort and durability - Low-cut construction for a light, fast fit and feel - Nylon composite shank for efficient power transfer - Lightweight EVA midsole for off-the-bike cushioning and all-day comfort - Carbon rubber lugged outsole for superior traction and durability - SPD compatible

The SCOTT MTB Team BOA shoe offers great comfort and adjustability. It combines excellent response with slipper-like comfort at an affordable price. The shoe features a sleek, asymmetric, conforming microfiber upper and a close-fitting, adaptive fit pattern with a BOA IP1 Fit System at the top. Combined with a lower anatomic fit strap, it articulates and adapts to the foot shape. The ErgoLogic insole features arch support and a metatarsal button. The injection composite sole has a stiffness index of 8.

The Jacket II is the “daily driver” of Giro's footwear line, at home on the pump track, the shop floor and over doubles on the trail—or at the pub. To cover this much ground with a single pair of shoes you have to get the balance right—durability and performance where it counts, with style throughout. GIro gets it. That’s why they use a reinforced, water-resistant microfiber upper matched to a Vibram Ecostep rubber outsole for comfort, durability and sure grip on the pedals. It’s the versatility you need, every day, to live pedal to the metal.

This is one of our best sellers across all Collections. It was designed by Louis Garneau himself after suffering a lot during the 1984 Los Angeles Olympics because he couldn’t find any technical shoes on the market at the time. And we’ve continued to improve it year after year since then. With a perfect racer fit, the carbon sole maximizes the energy transfer on the pedal and the sleek lines fit the foot perfectly while the perforated inner sole keeps you cool. We’ve thought of everything! Read the technical sheet, you’ll be impressed too. Technical Details: - Technology: RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture-wicking, breathable, and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt

As the name says, it’s made for the city. Here’s a great high-tech and versatile product with the champion’s specs that can just as easily be worn to go for a coffee or for groceries. You will barely feel the elastic tongue on your foot. Make a smart choice. Go for comfort and quality. Our patented T-Flex outer sole was designed for you to be able to walk everywhere you want after the ride. You won’t believe how comfortable it feels to semi-float on our great technical foam... - Technology : Integrated X-Comfort Zone technology with better stretch - Easy slip on and breathable for great comfort - Outsole: T-FLEX rubber outsole with fiberglass / nylon - Insole: Regular EVA insole - Cleats: SPD compatible with 2 bolt

The Jade XZ ranks No.1 of our best sellers. It’s easy to put on with the light mesh tongue and has all of this year’s superior components in a simplified version. Our carbon Ergo Air Stream sole was made to boost your pedaling force, reduce energy loss, and prevent cramps. These shoes have been built with extreme precision. Try them on! - Technology : Integrated X-Comfort Zone technology with better stretch - Easy slip on and breathable for great comfort - New Ergo Air Stream co injected for great stiffness - Insole: Breathable, ventilated - Closure System: 3 hook and loop fasteners for easy adjustments - Cleats: SPD and SPD-SL compatible with 2-3 bolt

No matter if your feet are thin, medium or wide, Garneau's X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. Having an internal lace system and a tight opening on the shoe's top avoids mud from sticking into the Baryum's fastening system. Get the best of both worlds with a stiff carbon outsole covered in rubber for optimal grip in any conditions. Heels and toes are protected with extra reinforcements so that you can head to the craziest trail sections with confidence. Technical Details - Shoe Technology: Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 12.7oz / 360g (size 42) - Outsole: Carbon and rubber outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Heel Retention: HRS-100 reinforced with 0.6mm membrane: Better heel positioning and reduced loss of power - Closure System: Boa L6 micro-adjustment

No matter if your feet are thin, medium, or wide, Garneau's X-comfort zone technology prevents numbness by extending the shoe's edges if needed. A rigid fiberglass-nylon outsole ensures all your legs' power goes into those pedals while a complete rubber cover makes for a perfect grip in any situation. The T-Flex technology zone provides flexibility to the front of the outsole, making the Gravel II a perfect multi-activity shoe. You can head to the gym, for a walk, or a bike ride without worrying about foot pressure or blisters. Technical Details: - Shoe Technology: X-Comfort Zone - Shoes Weight: 12.9oz / 365g (size 42) - Outsole: T-FLEX rubber outsole with fiberglass/nylon - Insole: Regular EVA insole - Closure System: 3 offset hook-and-loop straps

The best-selling Garneau cycling shoe Multi Air Flex II allows you to try any type of cycling on a budget. Not sure about using cleats with your new road or mountain bike? Ready to get rid of those running shoes that you use for spin classes? Don't look any further. The integrated X-Comfort zone technology prevents numbness by extending the shoe's edges if needed, no matter if your feet are thin, medium or wide. A breathable and ventilated insole takes care of your feet, while a rigid fiberglass-nylon outsole ensures an efficient pedal stroke. Front and back reflective accents make sure you're being seen anytime you ride. Technical Details - Shoe Technology: X-Comfort Zone - Shoes Weight: 10.4oz / 296g (size 42) - Outsole: Multi Air Flex nylon/fiberglass for easy walking; prevents heel pressure - Insole: Breathable, ventilated - Closure System: 3 offset hook-and-loop straps

Technical Details: - Racer Fit for snug upper - Bounded upper all seamless for comfort to prevent pressure points - Integrated double X-Comfort Zone for a large range of feet width - BOA Li2, a new mechanism that generates higher power with finer resolution - PowerZone Technology for better ankle support and stability - Lace system with 4 independent adjustment zone to maximized comfort during long rides - 100% Carbon sole with Patented Air Chanel for constant airflow to prevent fatigue and numbness - 3D insoles with 3 adjustable arches for a custom fit - 7.9oz / 225g (size 42)