Tools

- Slides into a hydraulic disc brake caliper to reset the piston when replacing pads, aligning pads, and performing other service procedures - Prevents scratching and damage to pistons

• HD hardened steel construction

Sunlite's Fork Crown Race Setting Tool works on 1 and 1 1/8-inch steerer tubes. It sets the headset race perfectly on your fork without damaging it. Slip your race on the steerer, place the aluminum setting ring on top, slide the shaft over the steerer and give it a tap with a mallet. Viola! Your fork is ready to go.

Ask any shop wrench what their favorite, most-used tool is and they'll probably answer the 3-way hex. Sunlite's Hex Wrench has a 4, 5 and 6mm hex to fit the most popular sizes on your bike. The rubber handle lets you wrench all day in comfort, too.

Sunlite's Cro-Mo Spoke Wrenches are forged from hardened and chrome plated chromoly for years of faithful service. The vinyl coating not only gives you a no-slip grip, but also lets you know what size it is instantly.

Keep those little chainring bolts snug with Sunlite's Chainring Bolt Spanner. It makes it easy to to swap out your rings, too.

- Adjustable torque wrench with ergonomic design - Twist dial adjust torque in preset 4, 5, and 6Nm settings - Includes 3, 4, and 5mm hex bits and T25 Torx bit

- Thin-profiled pedal wrench with a 15mm open end, and an integrated 16mm box end wrench - Thin profile is compatible with tricky pedals and those with narrow wrench flats - Rubberized coating on handle provides both positive grip and improved comfort - Made from long-lasting and durable Chromoly steel

- Laser-cut single-ended cone wrenches in a variety of common sizes - A must for any home, garage or shop

The Sunlite Shimano Freewheel Remover w/Guide fits the lockring on Shimano cassettes. Its hardened steel construction will last longer than your cassettes.

Use Sunlite's Shimano/ISIS BB Tool to remove Shimano and ISIS Drive splined 20-tooth bottom bracket cups. This tool uses wrench flats.

Use Sunlite's Shimano/ISIS BB Tool to remove Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Attach it it you a half-inch ratchet or torque wench and go to work.

• 14/15mm • 8mm Hex

- Heat treated - Individual hex keys

• For adding or replacing cage & rack mounts • Inserts are 10 to a bag

• 3-piece set • Steel

- Heat treated - Individual hex key

• Allows quick chain assembly without extra hands • Spring-loaded tool holds both chain ends

Be prepared out there with Sunlite's 9 Function Multi Tool. You've got 2, 2.5, 3, 4, 5 and 6mm Allen wrenches, a Torx 25 for your rotors as well as a flat and Phillips screwdriver. It's small, it's light and it barely takes up any room.

- Hardened & nickel plated - Fits Shimano, SRAM GXP, Truvativ, RaceFace, FSA, and Campagnolo - Dual-compound handle

- Chromoly construction - Used for truing most disc brake rotors - Non-slip handle - Multiple angles of use

- True universal chain breaker works with up to 11-speed chains - Comfortable ergonomic grip - Includes one replacement pin

- 14mm Socket wrench - 8mm Hex wrench - Hardened steel construction - Dual-compound grip

- 9 function multi tool - Hex keys: 2/2.5/3/4/5/6/8mm - Flathead and Phillips screwdrivers

- 15mm pedal wrench - Easy-to-grip rubber handle provides adequate leverage

- Easily plug a hole in a tubeless or tubeless converted tire - No need to remove the tire from the rim, simply plug, replace lost air and go - Includes: Insertion tool and (5) rope plugs

- Mini torque wrench preset to 5 newton meters - Includes 3, 4, 5, and 6mm hex bits, T20 and T25 torx bits

- 6 function mutli tool - Hex keys: 3/4/5/6mm - Flathead and Phillips screwdrivers

- 14mm socket for removing axle bolt - Rotating tip and non slip handle for ease of use - Chromoly construction

- Pro quality SIS cable cutter with integrated housing reamer - Durable chromoly construction with large comfortable ergonomic handles