Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage.
-45mm of adjustability
-28 oz water bottles max
-Constructed of AL-6061
$7.99
Make any pack Hydraform Reservoir-compatible with Osprey's Hydraform Magnet Kit. This handy kit includes three detachable sternum-strap magnets.
$5.99
The Bite Valve Cover keeps your reservoir bite valve free from dirt and dust on the trail.
$26.99
The new, low-gravity horizontal bladder has a 2L hydration capacity, and ships with a tube and 45° bite valve. The tube is 1m in length, providing better flow, the bladder is burst tested, and it is FDA and EU approved, meaning that it is Phthalate, BPA, and PVC-free. With a hose connector that has a push-lock function and auto shut-off valve, the bladder also has a tethered top hanging clip and hanging loops that allow you to dry it.
- 2.0L / 70oz
- Horizontal, low-gravity bladder
- Hanging loops for drying — inside and outside the bladder
- Tethered top hanging clip
- 1m length tube with better flow
- FDA and EU approved: Phthalate, BPA and PVC-free
- Burst tested
- Push-lock hose connector with auto shut off valve
- Ships with 45° bite valve
$10.00
• Installs on any 1/4-inch (.635cm) hose for easy disconnect/connect.
• Bonus extra male piece and hose to connect to water filters.
$12.00
Adapter for direct mounting of the Fuel Pack or other equipment with screw connections.
Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.
$102.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$38.99
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter
$11.99
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter
$36.99
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
$12.00
- Extra-strong magnet keeps the drinking tube in position during your activity.
- Two-piece design for attachment to the hip belt, backpack or vest
- Fits all EVOC hydration systems (excluding insulated drinking tubes)
$7.99
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
$11.00
Keep your water bottles clean and free of mysterious foreign objects. The CamelBak Bottle Brush Kit includes a large brush for scrubbing the inside of your bottle as well as small straw brush for cleaning the straw, cap, and bite valve.
$13.00
Keep your tube close and hydration on-tap with the Magnetic Tube Trap.
$13.00
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes.
- Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor
- CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning
- 8 Cleaning Tablets Per Pack.
$50.00
The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%.
- Can be filled with hot or cold water (up to 60°C)
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Volume: 2L
- Weight: 130g
- Measures: 17 x 32 x 1cm
$19.99
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame.
- Weight: 94g
$9.00
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount
(Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
$19.00
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
$41.99
Osprey’s Hydraulics 3L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
$13.99
Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages.
Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)
$8.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
$7.95
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
$5.99
Osprey’s Hydraulics Bite Valve provides a high-quality replacement for your old, neglected and beat up bite valve. The bombproof ¼ twist shut-off design guarantees you won’t experience any unpleasant leaks.
$99.95
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft
• HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position
• STABLE DESIGN - Stiffest mount on market with alloy arms
• FLARED CAGE DESIGN - Makes inserting bottle easy
• HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches
• ANTI-VIBRATION - Locking hardware for safety and security
• REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately)
• Aircraft aluminum mount
• Carbon fiber bottle cage
• Weight: 141.5 grams
Why single rear carriers?
• Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag.
• Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA.
• Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
$29.99
This bladder kit has a two-liter bladder volume capacity and sports a center baffle system with a zip that ensures bladder remains flat and that liquid does not splash around in the bladder. It also enables proper cleaning, as you can unzip it to clean it inside out. It ships with two tubed and bite valves, namely a hands-free tube with with 180º valve and a standard tube with 45º valve.
- Dishwasher-safe
- Center baffle system with a zip
- Bladder remains flat when zipped
- Liquids do not splash around in bladder
- Unzip to clean inside out
- Hanging loops for drying – inside and outside the bladder
- Tethered top hanging clip
- FDA and EU approved: Phthalate, BPA and PVC-free
- Burst-tested
- Twist-Lock hose connector with auto shut-off valve
- Ships with two tube and bite valve kits
- Hands-free tube with 180º valve
- Standard tube with 45º valve
- One-touch quick release valve on the hands-free tube system
- Helmet Velcro patch and loops to keep system in place for the hands-free system
$74.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails.
- Material: CNC aluminum
- Hydration Capacity: One or two bottles (up to 750cc each)
- Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Max Load: 2.5 kg / 5.5 lb
- Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included
- Angle adjustable
- Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9”
- Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
$11.00 - $12.00
Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.
$11.00
Our improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels.
$19.99
Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$50.00
Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking.
- 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect
- Blaster high-flow bite valve w/ shut-off
- Quick-disconnect tubing for easier refills
- Molded 3D bottom provides better shape inside pack
- Molded 3D bottom for much better drying between rides
$12.99
SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.
$16.19
- Insulated koozie designed for 12 oz cans
- Made for Origin8 by Bomber Jacket
- Made of Premium 4mm neoprene
- HD dye-sublimation print for long-lasting graphics
- Reduces rate of warming by 50%
- Collapsible design
- Gold Alloy Zippers
- Color: Speed
$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump.
- Material: Engineering grade plastic
- Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge
- Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I
- Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3”
- Weight: 30 grams / 1.06 oz
*Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included
$34.95
The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.
$31.99
Osprey’s Hydraulics LT 1.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning, and most importantly, staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
$20.00
Flexible option for fastening additional bottle holder or other accessories to the bike frame.
Are the holes in your bike frame in the wrong place or already in use? Using the O-Strap Bottle Cage Mount, you can additionally attach bottle holders or other items of equipment wherever you want them. This practical accessory is suitable for tubes of up to 60 mm diameter, whether on the frame or other parts of your bike.
$5.99
Kick up all the dirt you want, without eating it. This mud cap is compatible with all new Podium bottles launched in 2019, including Podium Chill, Podium Big Chill and Podium Ice. No matter what bottle you prefer, you can now drink clean.
$50.00
The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%.
- Can be filled with hot or cold water (up to 60°C)
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Volume: 3L
- Weight: 140g
- Measures: 18 x 42 x 1cm
$17.99
- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars
- Compatible with handlebars from 22mm to 36mm
$31.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
$39.99
Osprey’s Hydraulics 2L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
$53.00
Hydration for running, hiking and biking, wherever you may roam. We create ever-evolving hydration systems that keep up with our always-exploring adventurers. The Fusion 2L Reservoir with Tru Zip Waterproof Zipper offers revolutionary design that's easy to use. We bring heavyweight features in an ultralight package equipped with a universal hanger for all hydration-compatible packs. Molded backplate creates a thin profile with no need for baffles so cleaning is that much easier. Made with safer chemicals, earning the Repurpose Green Sustainability Badge. At journey's end, everyone will enjoy easier cleaning thanks to Hydroguard technology which inhibits the growth of bacteria in the reservoir and tube.
$75.00
Our new Fusion 6L Group Hydration Reservoir is perfect for adventures with friends and family. Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. It's enhanced by Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Pair with our ChillBak Pack 30 Cooler for portable party people to keep beverages cool. Dig dynamic design compatibility with our CamelBak reservoir filter kit and easy collapsibility for simple storage when the party's home for the week. Made with safer chemicals, earning the Repurpose Green Sustainability Badge.
$55.00
A dynamic, integrated hydration solution created for hardcore runners, hikers and cyclist, the Fusion 3L Reservoir with Tru Zip Waterproof Zipper is ready for the long haul. Enjoy convenient compatibility thanks to a universal hanger that will fit any hydration-compatible packs. Our Quicklink System ensures easy on-the-go reservoir removal from the pack. Keep it clean with Hydroguard technology to limit bacteria in the reservoir and tube. Even better, the rigid backplate eliminates need for baffle for easier cleaning and drying. Repurpose Green Sustainability Badge: Made with safer chemicals.
$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 6061-T6 Aluminum
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)
$9.50
- Individually packaged
- Enables mounting of a bottle cage in a variety of positions
- Fits 22.2-26.0mm handlebars
$5.99
New design ensures unrivaled fitness and cycling performance with proven hydration functionality.
$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$15.99
BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access.
• Material: POM head, PP bracket, Stainless steel hardware
• Size: 8cm x 6cm x 2cm
• Weight: 40 g
• Fits handlebar 24mm-32mm
• Versatile bracket rotates
$21.00
Keep your water flowing freely, even in the most harsh conditions. The Crux Thermal Control kit takes insulation to the next level so your tube and valve stay ice-free. Designed for reservoirs with the Quick Link system, this cold-weather accessory will extend the range of use your hydration pack during all outdoor adventures.
Features:
- Insulated Tube: Protects the flow of your fluids in cold conditions
- Freeze-Proof Valve: Integrated cover keeps ice from forming in bite valve
- Fits Reservoirs with Quick Link System: Keep your Crux working hard year-round with this easy upgrade
$4.99
- Customize your race belt with our removable micro race locks with quick release clasp
- Fully adjustable race bib toggles
- Hi-viz reflective accents
- Compatible with all Ergo & Ultralight Belts
$21.99
The all-in-one tool kit for faster cleaning and drying of your CamelBak Crux reservoir.
$59.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs.
- Material: Pressed aluminum
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Hydration Capacity: One or two bottles (up to 750cc each)
- Max Load: 2.5 kg / 5.5 lb
- Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage
- Added Feature: 2 angle positions
- Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7”
- Weight: 97 grams
Page 1 of 2
Next page