Helmets

Proven MIPS Coverage for Superior Open-Face Performance The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS liner, goggle compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face helmet. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready trail helmets in the market today. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360 Fit System allows you to dial in your perfect fit every ride - Weight: 360g Sizing - Small = 51 – 55cm - Medium = 55 – 59cm - Large = 59 – 63cm Certifications - CPSC - EN 1078 - AS/NZS 2063

Loosely based upon the leather "hairnets" that cyclists used to wear before protection was a priority, we took their ventilation and classic style and incorporated them into a modern helmet design that combines aerodynamics, weight, aesthetics, and ventilation—the Airnet with MIPS. - Ultra-light Mindset micro-dial fit system with height adjustability for the perfect fit. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports. - Composite matrix internal reinforcement allows larger vents for enhanced cooling. - drirelease Merino wool pads for increased comfort and sweat/ temperature management. - Vent grippers integrated at the front and rear for secure eyewear storage. - Thin, soft, and lightweight 4X DryLite webbing won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Reflective decals for increased visibility in low-light conditions. - MIPS-equipped.

CONQUER WITH CONFIDENCE Created with an all-new head form for a more universal fit and the super-slim Mips Air Node® integrated rotational impact protection system, the third-generation Rail is our most comfortable and lightweight trail helmet yet. Boasting a five-star safety rating from the world-renowned Virginia Tech Helmet Safety lab, the Rail also features an accessible, four-position, snap-in height adjustment system, increased ventilation, and supple, lightweight straps with a handy Fidlock® buckle. Comfort, confidence, and zero distractions—so you can focus on charging descents while staying cool on tough climbs. FEATURES: - Designed with a new, rounder head form for a more universal fit - Fully integrated, super-slim Mips Air Node® liner combines maximum rotational impact protection with ultra-lightweight comfort - In-molded upper, sub, and lower PC shells for optimal protective structure - Optimized low and high EPS density - Five-star safety rating from the Virginia Tech Helmet Safety Lab. - Easy to adjust, dual-arm, four-position, snap-in rear height adjustment fit system - 21 strategically placed vents for head-cooling airflow - Supple and lightweight straps with magnetic Fidlock® buckle system - Three-position adjustable visor - Broad top surface area for camera or light attachments SPECIFICATIONS: - Sizes: S (51-55cm) M (55-59cm) L (59-63cm) - Weight: 360g (Size M)

One helmet all road. The MET Allroad Mips is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Sporty on one side, comfy on the other. It's exceptionally lightweight and secure thanks to MET's distinguishing design. Perfect for your next bikepacking adventure. Featuring the MIPS-C2 brain protection system, the MET Allroad Mips is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - MIPS-C2 Brain Protection System - Snap in/out visor - Safe-T E-DUO Fit System - Vertical adjustment and ponytail-compatible - Integrated rear LED light - Reflective rear stickers - Internal air-channeling - Hand washable comfort pads - Adjustable cam divider - Certifications: CE; AS/NZS

- Visor: Yes - Impact Protection System: MIPS - Certification: CPSC, EN1078 - e-Bike approved: No

PROFESSIONAL TECHNOLOGY FOR BEGINNERS The Viantor is the high-quality and lightweight helmet for beginners in which we have used many proven technologies from the professional sport. Let yourself be convinced by a high-quality and safe helmet, which has the advantages of a professional race helmet. For maximum safety, the Viantor has the ActiCage structural reinforcement integrated in the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. The ActiCage allows for large ventilation openings without compromising on the helmet's safety. Due to its ponytail compatibility, the Viantor from ABUS is the first choice for riders with long hair. Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Ponytail compatibility: Helmet well suited for braided hairstyles - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - ActiCage: Structural reinforcement integrated in the EPS to optimize stability - Zoom Ace: Fine-adjustable adjustment system with non-slip adjustment wheel for individual fit

TLD's Stage helmet: less weight, more fun! Since its debut, the Stage helmet has redefined mountain bike safety, style, comfort and ventilation. Stage is the lightest full-face helmet in its class, and combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets. A Polylite shell w/fiber reinforcement and Polyacrilite injected chin bar w/EXOskeleton adds strength without sacrificing weight. 11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions. The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package. - DUAL DENSITY EPS co-molded with EPP - MIPS brain protection system - EPP lined chinbar - 690 grams (1.5 lbs) size M/L - Meets Certification for CPSC 1203, CE EN1078, ASTM F1952, ASTM F2032, and AS/NZS 2063 *Varies by regional standards

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs' MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS system and an industry-first dual-density EPP + EPS liner that protects against both high- and low-speed impacts; this is a helmet that doesn't take your safety lightly. Add in an adjustable strap and X-Static Pure Silver comfort liner, and the comfort is every bit on par with the protection. Specifications - Huge air intakes - 25% larger than A1 - connected to massive exhaust ports through deep internal channels provide powerful cooling efficiency - MIPS brain protection system reduces rotational forces to the brain in some crash scenarios - Dual-density EPS co-molded with EPP for state-of-the-art impact energy management at low- and high-crash speeds, as well as everything in between - Rear stabilizer fit system with flexible, slimline arms has 3-position front and rear locations for a custom fit - Adjustable strap dividers for a perfect fit every time - 350 grams (size M/L) - CPSC 1203, CE EN 1078, AS NZ 2063:2008

Fit, Protection, Style After years of research and development, the Troy Lee Designs Team is proud to introduce our latest creation - the A1 helmet. Here at TLD, styling, graphics, fit, function, and safety are key in everything we create. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps, or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection, and style you want. - Reinforced polycarbonate shell in-molded with EPS liner extends down the sides and back of the head for maximum protection and durability - MIPS brain protection system reduces rotational forces to the brain - 8 pressurized intake passages draw in cool air for maximum ventilation - 8 rear vacuum vortex outlets help exhaust helmet and draw heat from head - Triple position adjustable retention system allows customized fit for various eyewear, head shape, and riding styles - Single piece, ultra plush, removable, and washable comfort liner made of anti-microbial moisture wicking material for a dry, comfortable feel - Adjustable, moto-inspired visor with anodized aluminum hardware - Race-inspired styling - CPSC 1203, CE EN 107B, AS/NZS 2063 certified - 5-Star Rated by VA Tech Testing Institute Bicycle Helmet Testing lab

Fit, Protection, Style Here at TLD, styling, graphics, fit, function and safety are key in everything we create. After years of research and development, the Troy Lee Designs Team introduced the A1 helmet in 2013. We made one of the most comfortable MTB helmets on the market even safer with the addition of MIPS rotational brain protection. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single-track, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. "The A1 Classic MIPS Helmet takes top safety honors, earning a perfect 5-star rating in Virginia Techs impact test and was the number one tested mountain bike helmet." - VA Tech Helmet Testing Lab - Featuring MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head - EPS impact liner maximizes impact protection while minimizing weight - Innovative break-away visor screws - 16 port hi-flow cooling system both pulls and pushes air for maximum ventilation - Ultra-plush quick-dry comfort liner is both removable and washable for maximum ventilation - Adjustable, cam-lock strap dividers allow customization for different head shapes and riding styles - CPSC 1203*, CE EN1078*, *Varies by regional standards

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs’ MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS® system and an industry-first dual-density EPP + EPS liner that protects against both high and low-speed impacts; this is a helmet that doesn’t take your safety lightly. Add in an adjustable strap and X-Static® Pure Silver comfort liner and the comfort is every bit on par with the protection. - MIPS (Multi-directional Impact Protection System) - Patent pending, industry-first dual density EPP = EPS impact liner - Innovative break-away visor screws help reduce the likelihood snagging during a crash - Low-profile, semi-adjustable strap dividers - X-Static® Pure Silver comfort liner

Fit, Protection, Style Here at TLD, styling, graphics, fit, function and safety are key in everything we create. After years of research and development, the Troy Lee Designs Team introduced the A1 helmet in 2013. We made one of the most comfortable MTB helmets on the market even safer with the addition of MIPS rotational brain protection. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging singletrack, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. "The A1 Classic MIPS Helmet takes top safety honors, earning a perfect 5-star rating in Virginia Techs impact test and was the number one tested mountain bike helmet." - VA Tech Helmet Testing Lab - Featuring MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head - EPS impact liner maximizes impact protection while minimizing weight Innovative break-away visor screws - 16 port hi-flow cooling system both pulls and pushes air for maximum ventilation - Ultra-plush quick-dry comfort liner is both removable and washable for maximum ventilation - Adjustable, cam-lock strap dividers allow customization for different head shapes and riding styles - CPSC 1203*, CE EN1078*, *Varies by regional standards

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs’ MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS® system and an industry-first dual-density EPP + EPS liner that protects against both high and low-speed impacts; this is a helmet that doesn’t take your safety lightly. Add in an adjustable strap and X-Static® Pure Silver comfort liner and the comfort is every bit on par with the protection. - MIPS (Multi-directional Impact Protection System) - Patent pending, industry-first dual density EPP = EPS impact liner - Innovative break-away visor screws help reduce the likelihood snagging during a crash - Low-profile, semi-adjustable strap dividers - X-Static® Pure Silver comfort liner

The MET Estro MIPS is a versatile road helmet ready for your longest day on the bike. As comfortable as a top-of-the-line helmet, its design is widely open to maximize ventilation at low speeds. With 26 vents, 17 of which are inlets and 9 are exhaust holes, all of them work in synergy with the internally engineered air channeling system to ensure maximum ventilation. The Estro MIPS is also exceptionally comfortable. The 360° head belt in the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull, and its internal shape is welcoming for almost all different shaped heads. Featuring the MIPS-C2 brain protection system, the MET Estro MIPS is able to slide against the head in the event of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The front of the helmet features two dedicated ports for securely docking sunglasses while resting or climbing. The design reflects the purpose - to adapt to various uses and environments. Widely open, deeper coverage, a versatile visor, and a full polycarbonate wrap that makes it more durable by avoiding exposure of EPS surfaces to outdoor conditions. - In-mold polycarbonate shell with EPS liner - Full polycarbonate wrapped EPS liner to enhance durability - Extended head coverage for more thorough skull protection - MIPS-C2 Brain Protection System add protection in case of certain impacts - MET Safe-T Upsilon Fit System - 360° head belt and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamics and comfort - Sunglass ports to securely dock sunglasses - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - Certifications CE; AS/NZS; US

Inspired by our award-winning professional cycling helmet the Trenta, the MET Vinci MIPS exceeds the standards of comfort and safety, delivering an unmatched price-performance ratio. Featuring the MIPS-C2 brain protection system, the Vinci is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The Vinci is also exceptionally lightweight and extremely comfortable to wear. The internal air-channeling works in synergy with the exhaust ports, maximizing ventilation. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure thanks to the refined internal shape - MET Safe-T DUO Fit System - 360° head belt and vertical adjustments offer a customized fit - Straps with adjustable divider maximize aerodynamics and comfort - Comfort pads are hand-washable - 16 vents are internally engineered for air channeling to improve ventilation and comfort - Reflective rear decals to enhance visibility in low-light conditions - Sunglasses ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

The Veleno MIPS is the most versatile helmet in the MET range, giving the rider access to the entire world of cycling in one go thanks to its variety of features. Featuring the MIPS-C2 brain protection system, the MET Veleno MIPS is able to slide against the head in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The visor is minimal and removable thanks to invisible anchor clips that keep the design clean and stylish in both modes. The Veleno MIPS comes with 26 air vents and finely engineered internal air channeling to maximize the airflow. It also features two dedicated ports for securely docking sunglasses while resting or climbing. The 360° head belt of the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull and its internal shape is comfortable for almost all different shaped heads. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Upsilon Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The removable visor with hidden anchors ensures maximum versatility - Air Lite straps with an adjustable divider provide a comfortable and customized fit - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Sunglass ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle

The Pedelec 2.0 offers an uncompromising combination of comfort and protection. Complemented by clever features, it is the ideal companion when cycling in road traffic. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Forced Air Cooling Technology ventilation system keeps you cool and comfortable with 4 air inlets and 9 air outlets connected with flow channels - Zoom Ace Urban adjustment system with handy adjustment wheel for a customizable fit - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - High visibility due to powerful reflectors and an integrated LED taillight with 180-degree visibility - Foamed-in fly nets keep insects out - Lower edge protection provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Ponytail-compatible and well suited for braided hairstyles Sizing: - Medium: 52 – 57cm - Large: 56 – 62cm

The MET Terranova MIPS is designed for trail and eMTB riding. The construction and fit are inspired by MET's Roam helmet, guaranteeing optimal comfort. The increased head coverage ensures a higher level of protection around the two most sensitive brain areas: the back and the temples. Featuring the MIPS-C2 brain protection system, the Terranova is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The tool-free adjustable visor is injection-molded to flex and bend when there is an impact against it. This unique feature helps to manage extra rotational forces transferred to your neck in a crash. The Terranova MIPS also features two dedicated ports to securely dock sunglasses while climbing or resting. The 360° head belt in the MET Safe-T DUO retention system ensures that there will be no pressure points on the skull and makes the helmet perfectly stable on the head while riding on rugged terrains. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T DUO Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Sunglass ports to securely dock sunglasses when climbing or resting - Exceptionally comfortable and secure on the head thanks to refined internal shape - 17 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

Features: - Helmet with 2 outer shells and 2 EPS for increased safety and a perfect fit - Outer shell made of ABS - Maximum air flow and cooling through large ventilation openings with internal ventilation channels - Clear lacquer-sealed decors in high-quality color qualities - Comfortable, preformed and padded Dri-Lex inner lining with antibacterial Polygiene treatment, removable, sweat-absorbing and washable - Easy and quick removal of the cheek pads thanks to the emergency tabs - Secure eyeglass strap guidance thanks to the pre-formed shell design - Standard with break-away plastic umbrella screws for more safety in the event of a fall - IPX ACell's rotational impact absorption technology - GoPro mount included - Meets the safety standards EN1078 and CPSC for bicycle helmets

- Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Crash release visor system - Easy position visor, no bolts needed - D Ring closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 57 – 58cm - Medium = 59 – 60cm - Large: 61 – 62cm - X-Large: 63 – 64cm - XX-Large: 65 – 66cm

The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. WEIGHT: 280g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Rollsys System (ARS) VENTILATION: 18 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: Optional Aeroshell Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Lazer Aeroshell compatible Multi use polycarbonate cover which fits over top of your helmet. It covers the front and side vents to protect your head from rain and cold or to gain an aerodynamic advantage. Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Rollsys System (ARS) Easily adjust your helmet's fit by using the thumbwheel on the top of the helmet. Lazer's unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of the head. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Well ventilated Carefully designed vents and internal channeling pull air into the helmet and across your head for increased airflow. Essential for performance and comfort during high temperatures and hard efforts.

Designed with the speed of pro riders in mind, the Bluegrass Rogue Core MIPS is sharp, bold, and alternative. It's designed to properly protect the most sensitive head areas, the back, and the temples. - The Rogue Core Mips exceeds worldwide certifications and performs best at both linear and rotational impact thanks to its meticulously engineered EPS shell and the MIPS-C2® brain protection system attached inside the helmet - The visor is designed to enhance safety and protect from branches - In the event of a crash, the visor will adapt to the shell of the helmet to help withstand extra rotational forces transferred to the neck - The Safe-T Heta retention system provides an exceptional fit and keeps the helmet stable on the head - The 360° head belt ensures that there are no pressure points on the skull, while vertical adjustments provide a custom fit - The edge at the back of the helmet is designed to properly keep the goggle strap in place - Sunglasses can be securely docked into the two visor vents - The straps anchors are embedded into the EPS and you can quickly fasten them thanks to the Fidlock® magnetic buckle, even while wearing gloves

The Kali Protectives Maya 3.0 is an upgraded version of Kali's best-selling Maya helmet. It includes new features such as a dial retention fit system, added venting, and a newly designed visor. - LDL (Low Density Layer) technology is used throughout the interior of the helmet to reduce rotational impact forces up to 25%, and reduce low-g linear forces up to 30% - Composite Fusion Plus technology incorporates layers of multi-density cone shaped EPS foam to absorb different levels of impact and direct energy sideways and away from the brain - Removable/washable liner - Anti-microbial pads - Flex moto-style visor - Bug liner - Locking buckle and sliders - Dial rention fit system

Introducing the all-new Search helmet—designed for riders who seek adventure on two wheels. With the biggest vents in its class for maximum ventilation, Search is like having an air conditioner on your head. Taking high-performance features and cooling beyond racing, Search combines the best of both worlds—S-Works-derived innovation and performance with a modern, clean design. Whether gearing up for a gravel ride, lining up for a local event, or your morning commute, the Search helmet keeps you cool no matter the destination. All adventures tend to take us a little out of our comfort zone, so when dirt road descents get a little dicey, Search has got you covered with MIPS Evolve Core Solution and a 5-Star Virginia Tech® helmet rating from the internationally renowned Virginia Polytechnic Institute and State University. Combining confidence-inspiring features, functionality, and S-Works-derived ventilation, the Search epitomizes all-road adventure helmets. Sunglass Storage: The Search helmet features innovative sunglass storage with hidden rubber flaps that maintain a secure, rattle-free fit when keeping riders’ glasses safely stored on long climbs, low light descents, and moments of rest. Riders can easily insert and remove their glasses, even when in the saddle. Our sunglass storage solution also keeps the space between the helmet and your head clear - eliminating discomfort. Ventilation: Pulling inspiration from the S-Works Prevail 3, the Search features a similar ventilation system with huge rear exhaust ports—helping expel hot air pulled in through the front end, keeping a constant flow of cool air within the helmet. Fit System: The Search helmet shares the same premium FS3 Fit System and Occipital base adjustment with our S-Works Evade 3 and S-Works Prevail 3—enabling riders to personalize the fit for added comfort through tuning the helmet angle to ensure that the helmet and eyewear stay perfectly synched. For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Search earned the highest 5-Star Virginia Tech® Helmet Rating™ from internationally renowned Virginia Polytechnic Institute and State University. - Innovative sunglasses storage with hidden rubber flaps maintains a secure, rattle-free fit, keeping your glasses safely stored when you need to get them out of the way during long climbs or moments of rest. - FS3 Fit System and Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - The MIPS Evolve Core Solution is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some rotational forces transmitted to the brain during angled impacts. - The Search helmet features our 4D Brow Cooling technology and large rear exhaust ports for added ventilation. - Adjustable Tri-Fix web splitter with thin 10mm webbing for increased comfort. - 300g (Medium)

Our Full-Coverage Open-Face MTB Helmet Redefining open-face helmets, the Dropframe Pro has earned Virginia Tech's best rating (5 STARS) in their Bicycle Helmet Ratings program with the best rating of any helmet they have ever tested. Super-light and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS, our dual-density Varizorb EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Dual-density Varizorb EPS liner is meant to provide improved impact protection - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - Fixed visor is positioned perfectly for maximum air flow - Fidlock SNAP helmet buckle provides quick entry and exit - Removable antimicrobial and moisture-wicking liner - Includes additional pads for a custom fit - Small = 52 – 54cm - Medium = 54 – 56cm - Large = 56 – 58cm - X-Large = 58 – 60cm Certifications - CPSC - EN 1078 - AS/NZS 2063

This race-inspired design is known for its incredible fit and tremendous value. It has many similar features to the S-Works Prevail, like the Tri-Fix webbing system and 4th Dimension Cooling, granting the Propero III incredible performance at a more attainable price. - MIPS-equipped. - Easy-adjust, HairPort FSL II fit system with four height positions and micro-adjustable dial. - 4th Dimension Cooling System with Mega Mouthport for enhanced comfort. - Composite matrix internal reinforcement allows larger vents for greater cooling. - Soft 4X DryLite webbing material won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

When ripping down the trail, the last thing you need to worry about is if your helmet will protect you in a crash. Then again, you don't want to be stuck wearing a full-face on every trail ride. This is why we created the Ambush Comp—a lightweight, extended coverage helmet at a wallet-friendly price. Starting with protection, the Ambush Comp boasts a significant amount of extended coverage and a single density foam that's been reinforced by a Composite Matrix. The reason behind this is that it manages the energy from impacts more effectively. Even with the added protection, though, it fits comfortably with our low profile and fully integrated Mindset 360 fit system. And with its five height positions, this system provides unmatched adjustment, while an integrated dial allows for on-the-fly fine-tuning. The Ambush Comp also keeps you cool with our 4th Dimension Cooling System's massive vents and exhaust ports, so you don't have to worry about overheating—even on the hottest days. Finally, we included a micro-indexing visor that quickly adjusts positions and has plenty of room for goggle storage. Combined, these features put the Ambush Comp well in front of the competition. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - MIPS-equipped. - Composite Matrix internal reinforcement allows large vents for greater cooling. - In-molded shell improves strength and reduces weight. - Mindset 360 fit system provides a secure, comfortable fit with 360-degree tension adjustment, five height positions, and integrated dial for easy on-the-fly adjustments. - Micro indexing visor allows for a wide range of fast, secure on-trail adjustments, as well as convenient goggle stowage. - 4th Dimension Cooling system optimizes ventilation. - Extended coverage for added protection and durability. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.